Electrolux EOC6841AOX - Manuel (Page 32)

• Clean all oven accessories after each
use and let them dry. Use a soft cloth
with warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can destroy nonstick coating.
Stainless steel or aluminium
appliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the oven sur-
face. Clean the oven control panel
with the same precautions.
12.1 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf supports
1. Pull the front of the shelf support away
from the side wall.
2
1
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
The rounded ends of the shelf
supports must point to the front.
12.2 Pyrolysis
CAUTION!
If a hob is installed with the appli-
ance, do not use it at the same
time as the Pyrolysis function. It
can cause damage to the appli-
ance.
For steam models only: before
you start the cleaning procedure,
make sure that the water tank is
completely empty. Refer to “Emp-
tying the water tank”.
32 www.electrolux.com