Rs-232c, Communication control commands – Panasonic AG-DTL1 Manuel d'utilisation

Page 64

Advertising
background image

64

RS-232C

$

Communication control commands

Data transmitted by PC

Data returned from unit in response

Description of command

[STX] RAN [ETX]

[STX] RAN [ETX]

Enables the return of the ACK (acknowledge) code.
<Note>
This command is not acknowledged while a search control
command is being processed.

[STX] RAF [ETX]

[STX] RAF [ETX]

Disables the return of the ACK (acknowledge) code.
<Note>
This command is not acknowledged while a search control
command is being processed.

[STX] RCK [ETX]

[STX] RCK [ETX]

Checks whether communication has been established.
<Note>
This command is not acknowledged while a search control
command is being processed.

[STX] RSE:m [ETX]

Parameter
m =

0: Normal
1: No command when search is

completed

2: No command when search is

completed/when error is
discovered

[STX] RSE [ETX]

Sets the timing at which the search completion command is
to be sent and sets the enabling/disabling of the
transmission.

O

When “normal” is selected
When search is started: ACK code is returned.
When search is completed: [STX]((([ETX] is
returned.
When search is suspended: [STX]ER((([ETX] is
returned.

O

When “no command when search is completed” is
selected
When search is started: [STX]((([ETX] is returned
after ACK is returned.
When search is completed: No return
When search is suspended: [STX]ER((([ETX] is
returned.

O

When “no command when search is completed/when
error is discovered” is selected
When search is started: [STX]((([ETX] is returned
after ACK is returned.
When search is completed: No return
When search is suspended: No return

<Note>
This command is not acknowledged while a search control
command is being processed.

Advertising