Rs-232c, 4) list of commands – Panasonic AG-DTL1 Manuel d'utilisation

Page 56

Advertising
background image

56

RS-232C

(4) List of commands

The tables below show the send commands for each mode as seen from the PC side and the operations of
those commands.
“STX” is hexadecimal code 02H, “ETX” is hexadecimal code 03H, : is hexadecimal code 3AH, and the
“discrimination” and “data” parts signify the ASCII codes corresponding to their symbols.

O

Counter control commands

Data transmitted by PC

Data returned from unit in response

Description of command

[STX] CCP:data [ETX]

[STX] CCP [ETX]

Presets the CTL counter data (same as the CLP
command).

[STX] CLP:data [ETX]

[STX] CLP [ETX]

Presets the CTL counter data (same as the CCP
command).

[STX] CRT [ETX]

[STX] CRT [ETX]

Resets the CTL counter data.

O

Display control commands

Data transmitted by PC

Data returned from unit in response

Description of command

[STX] DFC:m [ETX]

[STX] DFC [ETX]

Set the display mode of the display tube.

[STX] DPP:mm [ETX]

[STX] DPP [ETX]

Sets the display position on the monitor screen.

[STX] DBW [ETX]

[STX] DBW [ETX]

Sets the characters to white.

[STX] DBB [ETX]

[STX] DBB [ETX]

Sets the characters to black.

[STX] DDS:d:t:m:r [ETX]

[STX] DDS [ETX]

Sets the display item on the monitor screen.

[STX] DMS:d:m:n [ETX]

[STX] DMS [ETX]

Sets the time system (12-hour or 24-hour) display mode.

O

Communication control commands

Data transmitted by PC

Data returned from unit in response

Description of command

[STX] RAN [ETX]

[STX] RAN [ETX]

Sets the ACK (acknowledge) code return function to ON.

[STX] RAF [ETX]

[STX] RAF [ETX]

Sets the ACK (acknowledge) code return function to OFF.

[STX] RCK [ETX]

[STX] RCK [ETX]

Checks the communication line.

[STX] RSE:m [ETX]

[STX] RSE [ETX]

Sets the search end mode.

Advertising