Dvd/cd/video cd player, Additional information 13 – Pioneer S-DV990ST Manuel d'utilisation

Page 84

Advertising
background image

Additional information

13

84

En

DVD/CD/Video CD player

Timer indicator is
blinking and the
system will not switch
on.

• Unplug the unit, then plug back in. Wait for one minute then switch on.
• Make sure the fan at the AMP section of the unit is not being blocked.
• Check that the speakers are connected correctly.
• If the problem persists, take it to your nearest Pioneer
authorized service center or your dealer for servicing.

Problem

Remedy

Problem

Remedy

The disc is ejected
automatically after
loading.

• Clean the disc.
• Align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on
the player, the disc cannot be used (see

DVD Video regions

on page 80).

• Allow time for any condensation inside the player to evaporate. Avoid
using the player near an air-conditioning unit.

Playback is not
possible.

• If the disc is loaded upside down, reload the disc with the label side face
up.

Picture playback stops
and the operation
buttons cannot be
used.

• Press

(stop), then

(play) to start playback again.

• Switch the power off once, then on again using the front panel

STANDBY/ON

button.

Settings are canceled.

• When the power is cut due to power failure or by unplugging the power
cable, settings will be canceled.

No picture/No color.

• Check that connections are correct and that plugs are inserted fully.
• Check the instruction manual of the TV/monitor to make sure the TV/
monitor settings are incorrect.
• If your TV/monitor is connected using an S-video cable, try changing the
S-Video Out setting (see

S-Video Out

on page 65).

Screen is stretched or
aspect does not
change.

• The

TV Screen

setting is incorrect. Set the TV Screen option to match the

TV/monitor you're using (see

TV Screen

on page 64).

When recorded on a
VCR or passed through
an AV selector, there is
disturbance in the
playback picture.

• This system uses copy-protection technology which may prevent
recording or cause picture problems when connected through a VCR or AV
selector. This is not a malfunction.

HTS.book 84 ページ 2003年4月28日 月曜日 午後8時0分

Advertising
Ce manuel est liée aux produits suivants: