Using the on-screen displays, English italiano français, Nederlands – Pioneer S-DV990ST Manuel d'utilisation

Page 21: Español deutsch, Getting started 03

Advertising
background image

Getting started

03

21

En

English

Italiano

Français

Nederlands

Español

Deutsch

1

If the system isn’t already on, press

STANDBY/ON to switch it on.

2

Press ROOM SETUP.

• If you have previously set up the room type

and seating position, the display will show
the current room settings.

3

Press ENTER.

4

Use the

/

(cursor up/down)

buttons to select a room type then press
ENTER.

Choose one of the following depending on
your room size:

S

– Smaller than average room

M

– Average room

L

– Larger than average room

5

Use the

/

(cursor up/down)

buttons to select a seating position
setting, then press ENTER.

Choose one of the following depending on
where your main listening position is:

Fwd

– If you are nearer to the front

speakers than the surround speakers

Mid

– If you are equal distance from the

front and surround speakers

Back

– If you are nearer to the surround

speakers than the front speakers

• The Room Setup automatically sets up

both channel level and speaker distance.
If you have already set the channel levels
manually (see page 61) or speaker
distance settings (see page 60), you will
see

Room Set?

in the display when you

first press the

ROOM SETUP

button.

• Using the Room Setup will overwrite any

previous settings you had for channel
level and speaker distance.

• For a more detailed surround sound

setup, see

Setting up surround sound

on

page 59.

Using the on-screen displays

For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you’ll need to use them when setting up the
system, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.

All the screens are navigated in basically the
same way, using the cursor buttons (

,

,

,

) to change the highlighted item and

pressing

ENTER

to select it.

• Throughout this manual, ‘Select’ means

use the cursor buttons to highlight an
item on-screen, then press

ENTER

.

HTS.book 21 ページ 2003年4月28日 月曜日 午後8時0分

Advertising
Ce manuel est liée aux produits suivants: