Stay, Arming the system setting the stay mode – Panasonic K10059 Manuel d'utilisation

Page 9

Advertising
background image

9

Arming the System

Setting the Stay mode

When you want to arm the system while persons stay inside, select this mode.

When you set the Stay mode,
— the perimeter zones, such as protected windows and doors, are armed
— interior sensors are left disarmed
— exit delay begins so that you can leave through the exit/entry door, and
— if the protected perimeter windows and doors are opened, an alarm sounds

immediately.

: Press the soft key (

), and follow steps 2 to 3 above, using

the cordless handset. Press [OFF] to go to the standby mode.

• To exit the menu, press [STOP] or [OFF].

To confirm the security mode you set, press [ADT] in the standby mode.

1

Press [ADT].

2

Press [g] at “ARM”.

3

Press [g] at “STAY”.

• The armed STAY message is displayed.

4

Press [STOP] to go to the standby mode.

Base Unit

ARM

g

STAY

g

ARMED

;;;

STAY

;;;

You may exit now

Example

Handset

ADT

SecurityPhone.book 9 ページ 2004年7月21日 水曜日 午後6時58分

Advertising