Panasonic K10059 - Manuel (Page 36)

Schedules
36
6 Enter the event number (00 to 07), then press
[*]. Refer to the Event Table on page 37 for
available events.
When selecting event number “01”, enter the
output number, then press [*].
When selecting event number “02”, enter the
access group number, then press [*].
When selecting event number “03” to “07”,
enter the partition number, then press [*].
0=arm all, 1=partition 1,
2=partition 2, 3=arm common
Enter the start time and days of week, then
press [*].
Hour= 00-12, minute= 00-59, AM= 0,
PM= 1
Days=move the cursor under the desired
days by pressing [*], then press “1” to
select the day. (SMTWTFS indicates days
of week.)
Enter the event’s stop time, AM/PM and days
of week, then press [*].
Enter the repeat option, then press [*].
0= no repeat
1=repeated weekly
2=repeated every other week
3=repeated every third week
4=repeated every fourth week
Enter the randomize option if desired, then
press [*] to save the setting.
0= No, 1= Yes
If you select “1”, the schedule time will
change within 60 minutes of the “hour”
time.
Ex. If you set to start at 6:15pm, it will start
first to start at 6:15pm. On the following
days it will start anytime between 6:00 an
6:59pm.
• To move the cursor to the right, press [*].
To move the cursor to the left, press [#].
• If you entered the wrong number, the cursor does
not move to the next item.
10 Enter Event
Forced Away 05
Example
10 Partition
0
START SMTWTFS
12:00AM 1000000
Example
SecurityPhone.book 36 ページ ２００４年７月２１日 水曜日 午後６時５８分