Other functions, User codes, Security codes & authority levels – Panasonic K10059 Manuel d'utilisation

Page 32: Rf user number

Advertising
background image

Security Codes & Authority Levels

32

RF User Number

If you enroll a wireless button device (keyfob) in system, you need to set the zone
number for the device.

Refer to “RF User Number” on page 31 in the 3000EN Security Systems User’s Guide.

While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).

Make sure all perimeter doors and windows are closed and

is

displayed.

1

Press [ADT].

2

Scroll to “OTHER FUNCTIONS” by pressing [d]

or [B], then press [g].

3

Scroll to “USER CODES” by pressing [d] or [B],

then press [g].

4

Scroll to “RF USER NUMBER” by pressing [d]

or [B], then press [g].

5

Enter your security code.

6

Enter the user number of 2 digits, then press
[g] (ENTER).

(Ex. To select user number 8, enter “08”.)

7

Enter the zone number of 2 digits.
(Ex. To select zone number 8, enter “08”.)

8

Press [g] (ENTER).

• If a confirmation tone (one beep) is not heard, you

entered the wrong security code in step 5 or wrong
user number in step 6. The setting is not saved.
Try again from step 4.

9

Press [STOP] to go to the standby mode.

READY

Base Unit

OTHER FUNCTIONS

g

USER CODES

g

RF USER NUMBER

g

ENTER CODE

----

Enter User #

-,-

Enter User #

0,8

=ENTER

READY

g

Example

Enter Zone #

--

Enter Zone #

08

=ENTER

READY

g

Example

SecurityPhone.book 32 ページ 2004年7月21日 水曜日 午後6時58分

Advertising