Panasonic K10059 - Manuel (Page 2)

2
This phone can be connected to an ADT Security System and used as an additional
keypad interface. You can program/control system functions using the buttons on
the telephone front panel.
The security system will provide the telephone line and power supply, and has
priority over the telephone functions.
Overview
N
Communication with the Security System
The phone functions as a user interface (keypad/display) for the security system.
N Arming and Disarming the Security System
You can arm/disarm the security system or set other system functions by using
the function menu on the display.
N Alarms
When an alarm condition occurs, the base unit and cordless handset can sound
an audible alarm with the status being displayed and announced, then the alarm
report can be sent to the Customer Monitoring Center, if programmed so the
alarm system is monitored, and upon receipt of an alarm signal by the Customer
Monitoring Center.
N Two Way Voice (SecurityLink
®
Plus TM )
In case of emergency, an operator in a Customer Monitoring Center can monitor/
announce/talk using the speakerphone on base unit and cordless handset, if
programmed.
N Remote Phone Control
You can remotely control the security system by entering function commands
from a touch tone phone located off the premises.
• ADT Monitoring Service must be in effect!
SecurityPhone.book 2 ページ ２００４年７月２１日 水曜日 午後６時５８分