Panasonic K10059 - Manuel (Page 24)

24
Device Commands
If some devices are set up for your system, you can activate or deactivate certain
lights or other devices using the Device Commands menu.
Confirm with your installer for devices set up for your system.
Refer to “Using Device Commands” on page 27 in the 3000EN Security Systems
User’s Guide.
To activate/deactivate devices
: Press the soft key ( ), and follow steps 2 to 6 above, using
the cordless handset. Press the soft key ( ), then press [OFF] to go to
the standby mode.
1 Press [ADT].
2 Scroll to “OTHER FUNCTIONS” by pressing [d]
or [B], then press [g].
3 Scroll to “DEVICE COMMANDS” by pressing [d]
or [B], then press [g].
4 To activate devices, press [g] at “ACTIVATE
DEVICE”.
To deactivate devices, scroll to “DEACTIV.
DEVICE” by pressing [d] or [B], then press
[g].
5 Enter your security code.
6 Enter the desired device number.
(Ex. To select device number 5, enter “05”.)
7 Press [g] (ENTER).
• If a confirmation tone (one beep) is not heard, you
entered the wrong security code in step 5 or wrong
device number in step 6. The setting is not saved.
Try again from step 4.
8 Press [STOP] to go to the standby mode
Base Unit
OTHER FUNCTIONS
g
DEVICE COMMANDS
g
ACTIVATE DEVICE
g
DEACTIV. DEVICE
g
OR
ENTER CODE
----
ENTER DEVICE #
--
ENTER DEVICE #
05
=ENTER READY g
Example
Handset
ADT
OK
SecurityPhone.book 24 ページ ２００４年７月２１日 水曜日 午後６時５８分