Setting the date and time, Other functions, Date/time – Panasonic K10059 Manuel d'utilisation

Page 18

Advertising
background image

18

Setting the Date and Time

You can set the date and time of the security system by following the operation
below. The date and time setting for the telephone should be programmed through
the “Telephone” menu.

While the security system is armed, you can not set the Date and Time. To
set, disarm the security system (p. 12).

: Press the soft key (

), and follow steps 2 to 7 above, using

the cordless handset. Press [OFF] to go to the standby mode.

1

Press [ADT].

2

Scroll to “OTHER FUNCTIONS” by pressing [d]

or [B], then press [g].

3

Scroll to “DATE/TIME” by pressing [d] or [B],

then press [g].

4

Enter your security code.

• The current date and time are displayed.
• If you entered the wrong security code, the phone

will go back to the previous display. Try again from
step 2.

5

Press [*].

• To exit the menu, press [0] to [9] or [#], or wait for

30 seconds. Then press [OFF]

6

1 Enter 4 digits for the time (hour and

minute). (Ex. To set 9:30, enter “0930”.)

2 When the cursor is on “A” or “P”, press [1]

for PM or [0] for AM.

3 Enter 2 digits each for the year, month, and

day. (Ex. To set May 15, 2004, enter “04 05
15”.)

• Military time can not be used.
• To move the cursor to the right, press [*].

To move the cursor to the left, press [#].

• If you entered the wrong number, the cursor do not

move to the next item.

• To cancel the setting, press [#] at the first digit or

wait for 30 seconds.

7

To save the new setting, press [*] at the last digit.

8

Press [STOP] to go to the standby mode.

Base Unit

OTHER FUNCTIONS

g

DATE/TIME

g

ENTER CODE

----

Time/Date SAT

12:00AM 01/01/00

Time/Date SAT

09:30A2004/05/15

Example

Handset

ADT

SecurityPhone.book 18 ページ 2004年7月21日 水曜日 午後6時58分

Advertising