Lexmark X642e MFP - Manuel (Page 63)

Settings
63
Using MFP menus
Use multi-page TIFF Provides a choice between
single-page TIFF files and multiple-page
TIFF files. For a multiple-page scan to
e-mail job, either one TIFF file is created
containing all the pages, or multiple TIFF
files are created with one file for each
page of the job.
This menu item applies to all scan
functions.
On* Multiple-page TIFF files are created.
Select the check box to turn this item
on.
Off One single TIFF file is created for
each page.
Clear the check box to turn this item
off.
Transmission Log Specifies when the transmission log
prints.
The log page is a confirmation that the
e-mails transferred successfully.
Print Log* The e-mail transmission log always
prints.
Do not print
log The e-mail transmission log does not
print.
Print only for
error The e-mail transmission log only
prints when an error occurs.
Log Paper Source Specifies the print media source used to
supply print media for the MFP to print a
log of all sent and received e-mails.
Envelopes do not apply.
Note: This menu item applies to all scan
functions.
Tray 1* Tray 1 (the standard tray) is the
specified print media source.
Manual
Feeder The multipurpose feeder is the
specified print media source.
Tray <x>
(if one or more
optional
drawers are
installed)
x is one tray of Tray 2–Tray 5. Tray 2–
Tray 5 are only listed as selections in
the values list based on whether the
same number of optional drawers are
installed. For example, if only two
optional drawers are installed, Tray 2
and Tray 3 appear in the values list.
Only one tray is the specified print
media source.
E-mail Bit Depth Enables the Mixed mode to have smaller
file sizes by using 1 bit images when
Color is set to Off. 1 bit*
8 bit
Allow Save as
shortcut Allows saving of e-mail addresses as
shortcuts. On
Off*
When it is set to No, the Save as
Shortcut button does not appear on
the E-mail Destination screen.
Background Removal Adjusts the amount of background
visible on a copy. -4 to +4 (0*) -4 sets Background Removal to off.
+4 sets Background Removal to the
maximum allowed.
Contrast Specifies the contrast used for the
e-mail. The default is dependent on the
Content menu item. If the Content menu
item is reset from the default setting,
then the default for Contrast is reset also. 0–5
Best for
content*
Best for content has a default value,
also, since the value is dependent on
the Content menu item. For more
information, see Content. If Content
is mono text, the Contrast default
value is 5. The default is 0 for items
other than mono text.
Any reset of the Content value resets
the default of the Best for content
value.
Shadow Detail Adjusts the amount of shadow detail
visible on a copy. -4 to +4 (0*) -4 preserves the least amount of
shadow detail.
+4 preserves the most shadow detail.
Scan edge to edge Specifies if the original document is
scanned edge-to-edge prior to sending
the e-mail. Off*
On
Menu item Purpose Values and descriptions