Lexmark X642e MFP - Manuel (Page 50)

Settings
50
Using MFP menus
Darkness Specifies the level of darkness
for the copy job. 1–9 (5*) A graphic representation depicts the values. As the
right or left scroll button is touched, the asterisk
moves back and forth on the line. 1 is next to the - and
9 is next to the +. As shown, 5 is the current value.
Number of
Copies Specifies the number of copies
for the copy job. 1–999 (1*)
Overlay Specifies the selection for
overlay text to print on each
page of the copy job.
The overlay looks similar to
the following on a page:
Confidential
Copy
Draft
Urgent
Custom
Off*
The Custom value is not shown unless text is entered
into the Custom Overlay text field from the EWS page.
The text used for the overlay is what the user entered
on the EWS page, but Custom must be selected in the
menu for the text to be printed as an overlay on each
page.
Custom Specifies a custom overlay. text entry field Use the text entry field to specify a custom overlay.
The field has a 64-character limit.
Allow priority
copies Allows interruption to a
network print job, so the MFP
may be used as a copier to
copy a page or document. On* Interrupts the print job at the next page.
Off Interrupts the print job at the next job boundary which
means between incoming individual print jobs.
Background
Removal Adjusts the amount of
background visible on a copy. -4 to +4 (0*) -4 sets Background Removal to off.
+4 sets Background Removal to the maximum
allowed.
Contrast Specifies the contrast used for
the copy job. The default is
dependent on the Content
menu item. If the Content
menu item is reset from the
default setting, then the default
for Contrast is reset, also. 0–5
Best for
content*
Best for content has a default value, also, since the
value is dependent on the Content menu item. For
more information, see Content. If Content is mono
text, the Contrast default value is 5. The default is 0 for
items other than mono text.
Any reset of the Content value resets the default of
the Best for content value.
Shadow Detail Adjusts the amount of shadow
detail visible on a copy. -4 to +4 (0*) -4 preserves the least amount of shadow detail.
+4 preserves the most shadow detail.
Scan edge to
edge Specifies if the original
document is scanned edge-to-
edge prior to making copies. Off*
On
Menu item Purpose Values and descriptions
- +
C
o
n
fi
d
en
ti
al