Lexmark X642e MFP - Manuel (Page 48)

Settings
48
Using MFP menus
Duplex Specifies how the output is
printed.
The orientation of each sheet
defaults to portrait. The
binding defaults to long edge.
For information on long edge
binding, see Duplex Bind on
page 70.
1 sided to 1
sided* The original draft placed in the ADF has printing on
one side of a sheet of paper. The requested copy is
one-sided, so each copied sheet only has an image
on one side of the sheet. The copy mimics the original
exactly.
1 sided to 2
sided The original draft has printing on one side of a sheet
of paper. The requested copy is two-sided, so an
image of an original page is placed on each side of a
copied sheet. For example, if the original is six sheets,
the copy is three sheets with printing on both sides.
Paper Saver Specifies how many images of
pages from a print job to place
on one printed page of print
media. Off* Places the image of one page from the print job onto
one printed page.
2 on 1 Portrait Places the images of two pages from the print job
onto one printed page with portrait orientation.
2 on 1
Landscape Places the images of two pages from the print job
onto one printed page with landscape orientation.
4 on 1 Portrait Places the images of four pages from the print job
onto one printed page with portrait orientation.
4 on 1
Landscape Places the images of four pages from the print job
onto one printed page with landscape orientation.
Print Page
Borders Specifies if a border is printed
around the edge of the page at
the margins. On* A page border prints when Paper Saver is set to 2 on
1 Portrait, 2 on 1 Landscape, 4 on 1 Portrait, or 4 on 1
Landscape.
Off A page border does not print.
Collate Keeps the pages of a print job
stacked in sequence when
making multiple copies of the
job. On* Copies the entire job the number of times specified.
For example, if you set Copies to 2 and have three
pages to copy, the MFP output is page 1, page 2,
page 3, page 1, page 2, page 3.
Off Copies each page of a job the number of times
specified. For example, if you set Copies to 2 and
have three pages to copy, the MFP output is page 1,
page 1, page 2, page 2, page 3, page 3.
Menu item Purpose Values and descriptions