Lexmark X642e MFP - Manuel (Page 33)

Network/Ports
33
Using MFP menus
Wireless
Standard Network or Network <x>
Use these menu items to change printer settings affecting jobs sent to the MFP through a network port, (either Standard
Network or Network <x>), where x represents 1 or 2.
Menu item Values
Mode Infrastructure
Ad hoc
Network Name list of available network names
print server*
Menu item Purpose Values and descriptions
PCL
SmartSwitch Configures the MFP so it
automatically switches to
PCL emulation when a print job
received through the network port
requires it, regardless of the default
printer language. On* The MFP examines data on the
network interface and selects
PCL emulation if the data indicates
that is the required printer language.
Off The MFP does not examine the
incoming data. The MFP uses
PostScript emulation to process the
job if PS SmartSwitch is On, or uses
the default printer language specified
in the Setup Menu if PS SmartSwitch
is Off.
PS SmartSwitch Configures the MFP so it
automatically switches to
PostScript emulation when a print
job received through the network
port requires it, regardless of the
default printer language. On* The MFP examines data on the
network interface connection and
selects PostScript emulation if the
data indicates that is the required
printer language.
Off The MFP does not examine the
incoming data. The MFP uses
PCL emulation to process the job if
PCL SmartSwitch is On, or it uses the
default printer language specified in
the Setup Menu if PCL SmartSwitch is
Off.
NPA Mode Specifies whether the MFP
performs the special processing
required for bidirectional
communication, following the
conventions defined in the Network
Printing Alliance (NPA) Protocol.
Note: Changing this menu item
automatically resets the MFP.
Off The MFP does not perform NPA
processing.
Auto* The MFP examines the data to
determine the format and then
processes it appropriately.