Sony DSR-30P - Manuel (Page 55)

Additional Information 55 EN
(continued)
Remedy
• Press AU MONITOR MAIN/L, SUB/R.
• Set the AUDIIO MONOTOR selector to “STEREO 1” or “STEREO 2.”
• Audio from one track only is selected. Press AU MONITOR MAIN/
L, SUB/R.
• The tape is defective. Use a new tape.
• Set the AUDIO MONITOR selector to the track where the sound is
recorded.
• Check that the safety switch is set to the recording enable position.
(page 6)
• The EXTERNAL TIMER switch is set to “REC.” (page 33)
• The EXTERNAL TIMER switch is set to “PB [AUTO REPEAT].”
(page 31)
• Check that the safety switch is set to the recording enable position.
(page 6)
• DSR-30 only: In the DF (Drop Frame) mode, the time code may skip
from 29-frame to 02-frame. (page 38)
• There is an unrecorded portion (blank) between recorded portions.
(page 14)
• Time codes are not recorded in sequence.
• The video heads are dirty. Clean the video heads using the video
head cleaning cassette. (page 52)
• Time code display may stop when you fast-forward or rewind the
tape. (page 14)
• The VCR stops automatically when the tape counter reaches 0:00:00.
Set the editing end point to 0:00:00.
• There is an unrecorded portion on the source tape.
• The portion to be replaced is recorded in both 12bit and 16bit audio
modes.
• The counter is set to the remaining time display. Press COUNTER
SELECT so that the tape counter or time code appears in the display
window. (pages 14, 43)
• The counter display stops when an unrecorded portion is displayed.
(page 14)
• The counter display may stop when you fast-forward or rewind the
tape. (page 14)
• Set the clock on the menu screen.
Symptom
Mixed sound is heard.
Though the tape is recorded in
stereo, playback sound is
monaural.
The playback sound is skipped.
The picture has no sound.
The tape ejects when you press
r
REC.
When the AC power is supplied,
recording starts automatically.
When the AC power is supplied,
playback starts automatically.
The tape ejects when you press
START/PAUSE.
Time codes are not sequential in
the display.
The VCR stops during insert
editing.
Assemble editing does not
operate.
The tape counter stops.
“– : – –” flashes in the display
window of the main unit.
Sound
Recording
Playback
Editing
Display