Searching using the index function, Searching in the list – Sony DSR-30P Manuel d'utilisation

Page 27

Advertising

Playback

Three kinds of search are available on this VCR:
– Searching for the beginnings of recordings: Index search
– Searching for a point on the tape where the recorded date changes:

Date search

– Searching for scenes recorded in the photo mode with a digital

camcorder: Photo search

Searching in the list

If the tape has a cassette memory, the recordings are listed in the
chronologically in the order they were made. You can search using this
chronological list.
If the tape does not have a cassette memory, you cannot search for
scenes in the chronological order.

Press SEARCH SELECT to select
the search type: INDEX, DATE
or PHOTO SEARCH.
The indicator of the search type you
selected lights.
The chronological list appears on the
monitor screen.

Press = or + to select a
recording.
The VCR starts searching and when it
locates the recording, begins
playback. During Photo search, the
VCR pauses.

Searching in the order of the actual positions of
the recordings on the tape

When you use a tape without a cassette memory, the VCR searches in
the order of the actual positions of the recordings, regardless of the
setting of “CM SEARCH” in the menu.
When you use a tape with a cassette memory, set “CM SEARCH” in the
SET UP MENU to “OFF.”

Press SEARCH SELECT to select the search type.
The indicator of the search type you selected lights.

Press = or + repeatedly to
locate the recording you want.
The VCR starts searching backwards
or forwards until the index number
comes to zero, then plays back the
recording. During Photo search, the
VCR pauses.

(Continued)

Searching using the
index function

Tips

• If you use a tape with

mark, the cassette

memory stores up to 135
index signals. (The number
changes depending on the
memory size combination
of index, date, and photo
data stored on a tape.) This
VCR is capable of storing
and retrieving up to 16
kbits of cassette memory.

• To locate recordings whose

signals are disabled to be
stored in the cassette
memory, or to locate
recordings in order of their
position on the tape, set
“CM SEARCH” to “OFF”
in the SET UP MENU. You
can use the same procedure
to search for a recording on
a tape without cassette
memory.

(Illustration: DSP-30P)

INDEX 3
SEARCH

INDEX SEARCH

1 28/1/96
2 2/2/96
3 20/2/96
4 15/6/96

3:00PM
4:00PM
6:30AM
9:00PM

LINE
LINE
LINE
LINE

5 24/7/96

1:30PM LINE

SUN
FRI
TUE
SAT
WED