Sony DSR-30P - Manuel (Page 49)

Editing 49 EN
Tip
During recording and playing
back, the indicators light
according to the audio
recording mode and the track
being recorded. Example:
when sound is recorded onto
the stereo 2 track in 12bit
audio.
Tips
• To execute V.O.S. (video on
sound) editing:
1 Record the audio first,
following the same
procedure as recording
video.
2 Follow the insert editing
procedure to record the
video.
• To insert audio from the
MIC jack, select “LINE 1” or
“LINE 2”, using the INPUT
SELECT button.
ST1 ST2
16BIT 12BIT
PCM MODE
How the audio recording mode selection affects
editing results
When you record from DV input
This VCR automatically records in the same audio recording mode as the
source tape, regardless of the AUDIO MODE setting in the SET UP
MENU. For this connection, press both STEREO 1 INSERT and STEREO 2
INSERT buttons.
When you record from LINE inputs
The sound is recorded in the audio recording mode selected in AUDIO
MODE of the SET UP MENU. Usually, choose the original audio
recording mode of the tape to be edited. Select the track to be replaced
according to the audio recording mode.
Original audio Menu Pressed Editing Result
mode of the choice button(s)
edited tape
12bit 12bit STEREO 1
(Fs32k) (Fs32k)
STEREO 2
STEREO 1 and
STEREO 2*
16bit STEREO 1 and
(Fs48k) STEREO 2*
16-bit 12bit STEREO 1 and
(Fs32k) STEREO 2*
16bit STEREO 1 and
(Fs48k) STEREO 2*
* Insert editing cannot be executed if you press only one button.
: Replaced section
Stereo1
Stereo2
Stereo1
Stereo2
Stereo1
Stereo2
Stereo1
Stereo2
No audio
No audio