JVC RX-DP15BC - Manuel (Page 56)

53
English
Surround and THX Modes Applicable to the Various Software
Available Surround modes and THX modes vary depending on the speaker settings and the incoming signals.
The tables from this page to the next page show the relation of the Surround/THX modes and the incoming signals (with the Zone 2 speakers,
surround back speakers, and 7.1-channel reproduction mode settings).
• If only front speakers are activated, you cannot use the THX modes and the 7.1-channel reproduction mode (EX/ES/7.1).
• The numbers inside the parentheses under the incoming signal type indicate the number of the front channels and that of the surround
channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and two (stereo) surround
signals.
Incoming Signal Type Zone 2 Surround Back Ch EX/ES/7.1 Available Available
(multi-channel) Speakers (NONE/1SPK/2SPK) (AUTO/ON/OFF) Surround Mode THX Mode
Dolby Digital EX ON Not available Not available DOLBY DIGITAL THX CINEMA
OFF 2SPK/1SPK AUTO DOLBY D EX* 1 THX SURR EX
ON DOLBY D EX* 1 THX SURR EX
OFF DOLBY DIGITAL THX CINEMA
NONE Not available DOLBY DIGITAL THX CINEMA
Dolby Digital ON Not available Not available DOLBY DIGITAL THX CINEMA
(3/2, 2/2) OFF 2SPK AUTO DOLBY DIGITAL THX U2 CINEMA
THX MUSIC
ON DOLBY D EX* 1 THX SURR EX
THX U2 CINEMA
THX MUSIC
OFF DOLBY DIGITAL THX CINEMA
1SPK AUTO DOLBY DIGITAL THX CINEMA
ON DOLBY D EX THX SURR EX
OFF DOLBY DIGITAL THX CINEMA
NONE Not available DOLBY DIGITAL THX CINEMA
Dolby Digital ON Not available Not available DOLBY DIGITAL THX CINEMA
(3/1, 2/1) OFF 2SPK AUTO DOLBY DIGITAL THX U2 CINEMA
THX MUSIC
ON DOLBY DIGITAL THX U2 CINEMA
THX MUSIC
OFF DOLBY DIGITAL THX CINEMA
1SPK AUTO DOLBY DIGITAL THX CINEMA
ON DOLBY DIGITAL THX CINEMA
OFF DOLBY DIGITAL THX CINEMA
NONE Not available DOLBY DIGITAL THX CINEMA
Dolby Digital ON/OFF Not available Not available DOLBY DIGITAL THX CINEMA
(1/0, 3/0)
Dolby Digital ON/OFF Not available Not available DUAL MONO Not available
(Dual Mono)
• For Dolby Digital 2-channel (2/0) and Dolby Surround, see “Incoming Signal Type (2-channel)” on the next page.
* 1 Depending on the
software’s
specification. In
case of some
softwares,
“DOLBY DIGITAL”
is applied.
51-60_RX-DP15B[C]f.pm6 04.4.14, 3:12 PM 53