JVC RX-DP15BC - Manuel (Page 24)

21
English
6. Turn MASTER VOLUME to
adjust the volume level of the
sound through the Zone 2 front
speakers.
Note:
When “ZONE2PREOUT” is set to “FIX” on the ZONE 2/
SPEAKERS 2 submenu (see page 43), the MASTER VOLUME
control will not work for adjusting the volume level of the sound
through the ZONE2 PREOUT jacks.
From the remote control:
When operating the receiver using the remote control, the
display on the unit always shows the Zone 1 source information
though you are operating it for the Zone 2 source.
1. Set ZONE 1/ZONE 2 (LEARN/
TRANSMIT) selector to “ZONE 2.”
Now the buttons and controls on the remote
control work for the Zone 2 operations.
2. Press AUDIO (ON).
The STANDBY lamp on the unit goes off, and the ZONE 2 ON/
OFF lamp on the unit lights up.
3. Select and play a source.
The sound comes out of the Zone 2 front speakers.
• If no sound comes out of the Zone 2 front speakers, see
page 32.
Notes:
• You cannot select “DVD MULTI” and “EXT 7.1CH” for Zone 2.
• When “TV” has been assigned as the source to the TV/DBS
button, it does not work. To change the source name, see
“Changing the Source Name” on page 27.
4. Press VOLUME +/– to adjust the
volume level of the sound through
the Zone 2 front speakers.
Note:
When “ZONE2PREOUT” is set to “FIX” on the ZONE 2/
SPEAKERS 2 submenu (see page 43), the VOLUME +/– control
will not work for adjusting the volume level of the sound through
the ZONE2 PREOUT jacks.
Down Up
Basic Operating Procedure for Zone 2
On the unit:
1. Press (STANDBY/ON).
The STANDBY lamp goes off, and the ZONE 1 ON/OFF lamp
lights up.
The front door moves down so that the source selecting buttons
appear, and the buttons and controls on the unit work for the
Zone 1 operations.
• For more details, see “Turning the Power On and Off (Standby)
and Selecting the Zone 2 Operations” on page 29.
2. Press ZONE 2 ON/OFF so that the
ZONE 2 ON/OFF lamp lights up.
3. Press DOOR DOWN so that you can use the
other buttons inside the front door.
4. Press ZONE 2 CONTROL so that
“ZONE 2” and the previously
selected Zone 2 source name
appear on the display.
Now the buttons and controls on the unit work for the Zone 2
operations.
5. Select and play a source.
The sound comes out of the Zone 2 front speakers.
• If no sound comes out of the Zone 2 front speakers, see
page 32.
Notes:
• You cannot select “DVD MULTI” and “EXT 7.1CH” for Zone 2.
• When “TV” has been assigned as the source to the TV/DBS
button, it does not work. To change the source name, see
“Changing the Source Name” on page 27.
The sources and functions available for the Zone 2
operations are limited.
For more details on the Zone 2 operations, see “Zone 2 (Sub-
room) Operations” on pages 29 to 32.
ZONE 1
ON/OFF
MASTER VOLUME
STANDBY / ON
STANDBY
To close the front door, press
DOOR UP once or twice.
The front door moves up in two steps.
DOOR
DOWN
SPEAKERS
VOLUME
ZONE 2 1
dB dB
The last Zone 2 source appears. The Zone 2 volume
level appears.
DVD DVD MULTI VCR 1 VCR 2 TV/ DBS CD VIDEO PHONO TAPE/MD CDR FM/AM EXT 7.1CH
ZONE 2
TRANSMIT LEARN
ZONE 1
DVD DVD MULTI CD
CDR
PHONO
TAPE/MD
EXT 7.1CH
VCR 1 VCR 2
FM/AM VIDEO TV/ DBS
STANDBY ON
ZONE 2
ON/OFF
VOLUME
ZONE 2
CONTROL
ZONE 2
ON/OFF
19-32_RX-DP15B[C]f.pm6 04.4.14, 6:33 PM 21