Engli s h deutsh français italiano español, Remote control unit, Displaying a still picture (freeze) – JVC DLA-G150CLU Manuel d'utilisation
Page 39: Zooming a part of the image (digital zoom t/w), Basic operations, When you press the freeze button, When you press the freeze button again, Moving the zoomed image
37
Basic Operations
ENGLI
S
H
DEUTSH
FRANÇAIS
ITALIANO
ESPAÑOL
DLA-G150CLU / LCT1123-001C / ENGLISH
■ Remote control unit
FREEZE message
FREEZE inhibit message
DIGITAL ZOOM inhibit message
Displaying a Still Picture (FREEZE)
While projecting an image, a still picture is obtained at any
time by using the FREEZE button on the remote control.
When you press the FREEZE button:
“FREEZE” appears on the screen for a few seconds and
then the still picture is shown on the screen. Refer to the
FREEZE message shown on the left of this page.
* To forcibly clear “FREEZE”, press the EXIT button.
When you press the FREEZE button again.
The original image resumes.
Notes
• During freezing, the picture sent from the signal source is
lost.
• If any of the inoperative buttons (“MENU”, “QUICK ALIGN.”,
“KEYSTONE”) are pressed while displaying a still picture,
“FREEZE” is displayed on the screen.
• This function will not work with some signal sources
(UXGA 60Hz, SXGA 60Hz). In this case, the FREEZE
inhibit message appears for a few seconds, as shown on
the left. To forcibly clear this message, press the EXIT
button.
Zooming a Part of the Image
(DIGITAL ZOOM T/W)
A part of the image being projected can be digitally magnified up
to four times. When the DIGITAL ZOOM T or W button is
pressed, “Digital zoom” appears on the screen together with the
level bar and magnifying power (
Ч1.0, Ч1.2, Ч1.4, Ч1.6, Ч2.0,
Ч2.5, Ч3.2, Ч4.0). When “15 sec.” is displayed in the menu,
“Digital zoom” will appear in approximately 15 seconds.
• To zoom up or zoom down, press the DIGITAL ZOOM T or
W button on the remote control.
Moving the zoomed image:
While “Digital zoom” appears on the screen, you can move
the zoomed image with the cursor (
5/∞/2/3) button on the
remote control.
5: Upper part of the image will be
displayed.
∞: Lower part of the image will be
displayed.
2: Left side part of the image will
be displayed.
3: Right side part of the image
will be displayed.
Notes
• This function will not work with some signal sources
(UXGA 60Hz, SXGA 60Hz). In this case, the DIGITAL
ZOOM inhibit message appears for a few seconds, as
shown on the left. To forcibly clear this message, press the
EXIT button.
• The quality of the zoomed image reduces in comparison
with the original one.
• To return to the original size (
×1.0) and original position,
press the PRESET button while “Digital zoom” is displayed
on the screen.
DVI
VIDEO
COMP
QUICK
ALIGN.
PC1
PC2
Y/C
HIDE
PRESET
ENTER
EXIT
MENU
FREEZE
SCREEN
OPERATE
DIGITAL
ZOOM
ZOOM
FOCUS
W
W
S
T
W
T
RM-M160 REMOTE CONTROL UNIT
SCREEN
KEYSTONE
W
S
FREEZE button
PRESET button
EXIT button
DIGITAL ZOOM
T/W button
Cursor buttons
5/∞ / 2/3
FREEZE
FREEZE
D.ZOOM
FREEZE
Remote control unit
Digital zoom
1.2
DIGITAL
ZOOM
W
T
Remote control unit
Eng_Body.fm Page 37 Wednesday, May 15, 2002 10:17 AM