JVC VR-510U - Manuel (Page 39)

39
Problem
No power is supplied.
Operation buttons such
as [REC] and [PLAY] do
not respond when
pressed.
No picture is shown
during playback.
Timer recording is not
possible.
The menu screen can’t
be displayed.
The date/time is not
shown on screen.
The date/time is not
recorded.
The timer indication
blinks.
Recording/playback is
not possible.
No sound in playback.
Skip search or direct
search is not possible.
Cause
● The power cord may be disconnected.
● The Operation Lock mode may be
engaged.
● The monitor may not be properly
connected.
● The selected camera may not be
transmitting a signal.
● The clock may not be set.
● The Timer Standby Mode may have
been turned off. Is the [TIMER]
indication lit?
● The timer program may not be set
correctly.
● The Timer Standby Mode may be
engaged. Is the [TIMER] indication lit?
● The Record, Play or Simultaneous Play
mode may be engaged.
● <ON SCREEN MODE> may be set to
“OFF”.
● The clock may not be set.
● Menu switch <TIME DATE REC> may
be set to “OFF”.
● The timer is not programmed or a set
program cannot be executed.
● There may not be enough space
available on the hard disk.
● Cameras may not be connected in
sync.
● <AUDIO REC> may not be “ON”.
● The clock may not be set correctly.
Possible solution
● Connect the provided power cord to a
120 V AC outlet.
● Release the Operation Lock mode.
● Connect the monitor correctly.
● Select the camera for recording.
● Check the clock setting.
● Press the [TIMER] button to engage the
Timer Recording Standby mode.
● Check the timer program settings. The
[TIMER] indication blinks if a program
cannot be executed.
● Press the [TIMER] button to release the
timer program.
● Stop the operation, then press the
[MENU] button.
● Set <ON SCREEN MODE> to “ON”.
● Set the clock.
● Set menu switch <TIME DATE REC> to
“ON”.
● Re-set the program timer.
● Re-format the hard disk to clear existing
data.
● Input the signals in sync.
● Set <AUDIO REC> to “ON”.
If <REC SPEED> is set to “1/5” or “1/
10”, audio signals cannot be recorded.
● Set the clock.
Page
reference
9
20
9
13
26
19
13
23 – 25,
37
10
19
13
9-2 No error indication
9 TROUBLESHOOTING (contd.)