JVC VR-510U - Manuel (Page 20)

20
Setting item Menu switch Setting value Description
DVR MODE AUDIO REC [ON] Sets whether or not audio signals are recorded during
OFF recording.
ON : Records audio signals.
OFF: Does not record audio signals.
*When menu switch <REC SPEED> is set to "1/5" or"1/10",
this item will be automatically set to "OFF".
POWER ON REC ON Sets whether or not recording re-starts when the power is
[OFF] restored after a power failure.
To automatically re-start recording, set this switch to “ON”.
SEARCH BUTTON [TIME] Selects the [SEARCH] button function.
ALARM TIME : Executes time search when the [SEARCH] button is
EVENT pressed.
ALARM: Executes alarm search when the [SEARCH] button is
pressed.
EVENT : Executes event search when the [SEARCH] button is
pressed.
Reference: “7-3 Skip search” on page 33.
SKIP DURATION 1 MINUTE Selects the duration to skip when time search is performed.
5 MINUTE
10 MINUTE
30 MINUTE
[1 HOUR]
4 HOUR
1 DAY
1 WEEK
REPEAT REC [OFF] Sets whether or not repeat recording is executed.
AL•STOP OFF : Repeat recording is not executed.
AL•LOCK AL·STOP : Repeat recording is not possible if an alarm
ALL recording is executed even once.
AL·LOCK : The alarm recording is protected from overwriting
during repeat recording.
ALL : When no space is available for recording, previous
recording are overwritten, starting with the oldest
recording.
Reference: “Repeat recording during alarm recording” on
page 28.
TIME DATE REC [ON] Sets whether or not time/date is recorded during recording.
OFF ON : Records the time/date.
OFF: Does not record the time/date.
*If menu switches <DAY>, <TIME> and <AL/SENS DET
MARK> are set to “OFF”, the on-screen display is not
recorded regardless of this setting.
OPERATE LOCK [ALL] Sets the lock operation when the operation lock is set to “ON”.
MODE REC ALL : Locks all buttons on the front panel.
REC : Locks the [STOP] button on the front panel so hard disk
recording cannot be stopped.
* Set to “ALL” for timer recording.
EXT SWITCHER [ON] Sets whether or not to use an external switcher.
OFF OFF: External switcher not used (no signal output from the
[CAM SW OUT] terminal).
ON : Uses an external switcher (signals output from the [CAM
SW OUT] terminal).
EXT MODE REC MODE [OFF] Sets whether or not automatic recording is executed with an
TRIG external trigger signal.
MANUAL OFF : Does not execute automatic recording.
TRIG : Starts recording with an external signal.
MANUAL : Executes recording while external signals are input.
HDD FULL OUT [OFF] Sets whether or not the “HDD FULL” signal is output.
ON OFF: Does not output an HDD FULL signal.
ON : Outputs a signal when the remaining capacity of the
hard disk is 0%. When <REPEAT REC> is set to “ALL”,
signals are not output.
5 ON-SCREEN DISPLAY/MENU SWITCHES (contd.)
5-3 Menu switch details
(contd.)