JVC VR-510U - Manuel (Page 34)

34
7-3 Skip search
(contd.)
7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK (contd.)
Event search
1. Turn the power ON.
Check the connections and set the [POWER] switch on
the rear panel to ON.
2. Set the menu switch.
Display the [DVR MODE] screen and set menu switch
<SEARCH BUTTON> to “EVENT”. For details, refer to
“Setting” on page 18.
3. Start playback.
Press the [PLAY] button to start playback.
4. Execute event search.
Press the [SKIP SEARCH·EXECUTE] button to perform
event search. The Still mode is engaged at the start of
the next event.
To check the event, press the [PLAY] button.
Alarm search
1. Turn the power ON.
Check the connections and set the [POWER] switch on
the rear panel to ON.
2. Set the menu switch.
Display the [DVR MODE] screen and set menu switch
<SEARCH BUTTON> to “ALARM”. For details, refer to
“Setting” on page 18.
3. Start playback.
Press the [PLAY] button to start playback.
4. Execute the alarm search.
Press the [SKIP SEARCH·EXECUTE] button to perform
alarm search. The Still mode is engaged at the start of
the next alarm recording.
To check the event, press the [PLAY] button.
About event/alarm search
● Each time the [SKIP SEARCH·EXECUTE] button is pressed in the Event Search mode, the head jumps to the start position of
the next recording regardless of whether it is a normal recording or alarm/sensor recording.
● Each time the [SKIP SEARCH·EXECUTE] button is pressed in the Alarm Search mode, the head jumps to the start position of
the alarm/sensor recording.
● If the [SKIP SEARCH·EXECUTE] button is pressed continuously, the head stops at the end of the recording.
● In the Event Search or Alarm Search mode, the head cannot jump to the beginning of the pre-sensor recording.
POWER
WARNING
SLEEP REC STOP PLAY STILL
TIMER CANCEL
DISPLAY
MENU
SEARCH
SELECT
REV FWD
EXECUTE
SKIP/ALARM
SEARCH
REC
CLOCK RESET/ CLEAR
OPE. LOCK
ON
DIGITAL VIDEO RECORDER VR-510U
[STOP] button [STILL] button
[PLAY] button
Jog dial
Shuttle search dial
[SKIP SEARCH·EXECUTE] button
Event 1 Event 2
(alarm recording 1)
Event 3 Event 6 Event 4
(sensor
recording 1)
Event 5
(alarm
recording 2)
[SKIP SEARCH·EXECUTE] button
[SKIP SEARCH·EXECUTE] button
[SKIP SEARCH·EXECUTE] button
[SKIP SEARCH·EXECUTE] button
[SKIP SEARCH·EXECUTE] button
[SKIP
SEARCH·EXECUTE]
button
Current position
In the Event
Search mode
In the Alarm
Search mode
Pre-
sensor
recording