JVC VR-510U - Manuel (Page 21)

21
Setting item Menu switch Setting value Description
ALARM/ REC MODE [OFF] Sets the alarm or sensor recording.
SENSOR MODE ALARM OFF : Does not execute alarm/sensor recording.
SENSOR ALARM : Executes alarm recording.
SENSOR : Executes sensor recording.
Reference: “6-4 Alarm recording” on page 28 and “6-5 Sensor
recording” on page 29.
REC DURATION 10 SEC Selects the recording duration when an alarm or sensor signal
15 SEC is input.
30 SEC 10 SEC : Executes alarm/sensor recording for 10 sec.
60 SEC 15 SEC : Executes alarm/sensor recording for 15 sec.
120 SEC 30 SEC : Executes alarm/sensor recording for 30 sec.
[180 SEC] 60 SEC : Executes alarm/sensor recording for 60 sec.
MANUAL 120 SEC : Executes alarm/sensor recording for 120 sec.
180 SEC : Executes alarm/sensor recording for 180 sec.
MANUAL: Executes alarm recording for as long as an alarm
signal is input.
*Recording continues about 5 seconds after the set duration
has passed.
(<AL/SENS DET MARK> is also shown.)
PRESENSOR REC [OFF] Sets whether or not pre-sensor recording is executed.
ON To execute pre-sensor recording, set this switch to “ON”.
Reference: “Pre-sensor recording” on page 29.
PRESENSOR REC [10 SEC] Selects the recording duration when menu switch
DURATION 30 SEC <PRESENSOR REC> is set to “ON”.
60 SEC Reference: “Pre-sensor recording” on page 29.
BUZZER HDD END [OFF] Sets whether or not the buzzer sounds when the hard disk is
ON full (during recording).
OFF: The HDD end buzzer does not sound.
ON : The buzzer sounds.
ALARM/SENSOR [OFF] Sets whether or not the buzzer sounds during alarm/sensor
ON recording.
OFF: The buzzer does not sound.
ON : The buzzer sounds.
WARNING [OFF] Sets whether or not the buzzer sounds when a warning occurs.
ON OFF: The buzzer does not sound.
ON : The buzzer sounds.
UTILITY AUTO SCANDISK [OFF] Sets whether or not the disk is scanned when the power is
ON turned ON.
OFF: Disk is not scanned.
*The disk is not scanned unless the Record mode is engaged
before the power is turned OFF.
ON : Scans the disk when the power is turned ON.
Reference: “8-1 Hard disk maintenance” on page 36.
MANUAL SCAN [OFF] When this switch is set to “ON” and the [SKIP
DISK ON SEARCH·EXECUTE] button is pressed, the disk is scanned.
Reference: “8-1 Hard disk maintenance” on page 36.
QUICK ERASE [OFF] Selects whether the hard disk is formatted with standard or
STD extended mode.
EXTN When the disk is formatted, all existing data on the hard disk
will be erased.
OFF
: Does not format.
STD : Normally, use this position. Up to 13,000 alarm/
sensor events can be recorded.
EXTN : Set to this position if you want to be able to record
more than 13,000 alarm/sensor events (up to about
100,000 events).
* Extended formatting takes about 5 minutes to complete.
Recording time is shorter than with the standard format.
Reference: “8-1 Hard disk maintenance” on page 37.
5 ON-SCREEN DISPLAY/MENU SWITCHES (contd.)
5-3 Menu switch details
(contd.)