JVC RX-8040B - Manuel (Page 59)

57
English
CD player
After pressing CD, you can perform the following operations on the
CD player:
PLAY : Start playing.
4 : Return to the beginning of the current (or previous)
track.
¢ : Skip to the beginning of the next track.
STOP : Stop playing.
PAUSE : Pause playing. To resume, press PLAY.
1 – 10, +10 : Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
CD changer
After selecting “CDDSC” by pressing CONTROL repeatedly, you
can perform the following operations on the CD changer:
PLAY : Start playing.
4 : Return to the beginning of the current (or previous)
track.
¢ : Skip to the beginning of the next track.
STOP : Stop playing.
PAUSE : Pause playing. To release, press PLAY.
1 – 6, 7/P : Select the number of a disc installed in the CD
changer.
After pressing CD, you can perform the following operations on the
CD changer:
1 – 10, +10 : Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Example:
• Selecting disc number 4, track number 12, and starting playback.
1. Press CONTROL repeatedly until “CDDSC” appears on
the remote’s display, then press 4.
2. Press CD, then press +10, 2.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301), you can do the following operations
using the 10 keys after pressing CD:
1. Select a disc number.
2. Then select a track number (always enter two digits).
3. Press PLAY to start playback.
Examples:
• Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then PLAY.
• Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then PLAY.
• Selecting disc number 105, track number 12, and starting playback.
Press 1, 0, 5, then 1, 2, then PLAY.
Note:
It is required to press each button within 4 seconds in the above
procedures.
Turntable
After pressing PHONO, you can perform the following operations
on the turntable:
PLAY : Start playing.
STOP : Stop operations.
CD recorder
After pressing CDR or selecting “CDR” by pressing CONTROL
repeatedly, you can perform the following operations on the CD
recorder:
PLAY : Start playing.
4 : Return to the beginning of the current (or previous)
track.
¢ : Skip to the beginning of the next track.
STOP : Stop playing and recording.
PAUSE : Pause playing or recording. To resume, press
PLAY.
1 – 10, +10 : Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
¶ REC : Press this button together with PLAY to start
recording (only for Zone 1 operations).
Press this button together with PAUSE to enter
recording pause (only for Zone 1 operations).
Cassette deck
After pressing TAPE/MD or selecting “TAPE” by pressing
CONTROL repeatedly, you can perform the following operations on
the cassette deck:
PLAY : Start playing.
REW : Fast-wind the tape from right to left.
FF : Fast-wind the tape from left to right.
STOP : Stop playing and recording or fast-wind the tape.
PAUSE : Pause playing or recording. To resume, press PLAY.
¶ REC : Press this button together with PLAY to start
recording (only for Zone 1 operations).
Press this button together with PAUSE to enter
recording pause (only for Zone 1 operations).
Note:
When connecting the cassette recorder to the TAPE/MD IN jacks,
change the source name correctly (see page 24).
MD recorder
After pressing TAPE/MD or selecting “TAPE*” by pressing
CONTROL repeatedly, you can perform the following operations on
the MD recorder:
PLAY : Start playing.
4 : Return to the beginning of the current (or previous)
track.
¢ : Skip to the beginning of the next track.
STOP : Stop playing and recording.
PAUSE : Pause playing or recording. To resume, press
PLAY.
¶ REC : Press this button together with PLAY to start
recording (only for Zone 1 operations).
Press this button together with PAUSE to enter
recording pause (only for Zone 1 operations).
Notes:
• When connecting the MD recorder to the TAPE/MD IN jacks,
change the source name correctly (see page 24).
* Selecting “TAPE” will allow you to control the MD recorder.
53-65_8040[C].p65 04.5.14, 11:30 57