JVC RX-8040B - Manuel (Page 57)

55
English
One-Touch DVD Play
Simply by starting playback on the DVD player, you can enjoy the
DVD playback without setting other switches manually.
When you press PLAY on the remote control supplied for this
receiver for operating the DVD player, the receiver automatically
turns on and changes the Zone 1 source or Zone 2 source,
depending on ZONE 1/ZONE 2 selector setting on the remote
control, to the appropriate input—“DVD” or “DVD MULTI” as the
Zone 1 source, and “DVD” as the Zone 2 source.
For Zone 1 operations: The TV automatically turns on and changes
the input mode to the appropriate position so that you can view the
playback picture.
• When the DVD player is connected through the analog input jacks
on this receiver (and analog input is selected), the receiver
automatically turns on and changes the source to “DVD” or “DVD
MULTI.”
– If the receiver is already turned on with the ZONE 2 indicator
and the source name for Zone 2 are shown on the unit’s display,
the receiver changes the Zone 2 source to “DVD.” In this case,
the TV will not turn on.
• When the DVD player is connected through the digital input
terminal on this receiver (and digital input is selected), the
receiver automatically turns on and changes the Zone 1 source to
“DVD.”
– If the receiver is already turned on with the ZONE 2 indicator
and the source name for Zone 2 are shown on the unit’s display,
the receiver changes the Zone 2 source to “DVD.” (If no analog
connection is made for the DVD player, no sound comes out of
the Zone 2 front speakers).
Automatic Selection of TV’s Input Mode (Only for Zone 1
Operations)
• When you select “TV” as the Zone 1 source to play on the
receiver, the TV automatically changes the input mode to the TV
tuner so that you can watch the TV.
• When you select DVD, DVD MULTI, VCR 1, VCR 2, VIDEO or
DBS as the Zone 1 source to play on the receiver, the TV
automatically changes the input mode to the appropriate position
(either Video Input 1 or Video Input 2) so that you can view the
playback picture.
Note:
This function does not work when you connect this receiver and the
TV with the AV COMPU LINK EX jack using a component video cable.
In this case, reconnect the TV referring to CASE 1 or CASE 2 on page
54.
Automatic Power On/Off (Standby)
The TV (for Zone 1 only), VCR 1 (VCR connected to the VCR 1
jacks), and DVD player turn on and off along with the receiver.
Automatic Power On:
• When you turn on the receiver by pressing STANDBY/ON
on the unit, or AUDIO POWER ON on the remote control
with ZONE 1/ZONE 2 selector set to ZONE 1:
OR
When you turn on the Zone 1 sound by pressing
ZONE 1 ON/OFF while the receiver is turned on:
\ The ZONE 1 indicator lights up and the source name for Zone
1 appears on the unit’s display, and:
– If the previously selected Zone 1 source is VCR 1, the TV
and VCR 1 will turn on automatically.
– If the previously selected Zone 1 source is DVD or DVD
MULTI, the TV and DVD player will turn on automatically.
– If the previously selected Zone 1 source is VCR 2, VIDEO,
TV or DBS, only the TV will turn on automatically.
• When you turn on the receiver by pressing
AUDIO POWER ON on the remote control with the
ZONE 1/ZONE 2 selector set to ZONE 2:
OR
When you turn on the Zone 2 sound by pressing
ZONE 2 ON/OFF while the receiver is turned on:
\ The ZONE 2 indicator lights up on the display, and:
– If the previously selected Zone 2 source is VCR 1, the
VCR 1 will turn on automatically.
– If the previously selected Zone 2 source is DVD, the DVD
player will turn on automatically.
– If the previously selected Zone 2 source is VCR 2, VIDEO,
or DBS, nothing happens.
Automatic Power Off (Standby):
• When you turn off the receiver by pressing STANDBY/ON
on the unit or AUDIO POWER STANDBY on the remote
control, the TV, VCR 1 and DVD player will turn off (standby).
• When you turn off the Zone 1 sound by pressing
ZONE 1 ON/OFF, the selected Zone 1 source component and the
TV turn off.
– If the ZONE 2 indicator is lit on the unit’s display, nothing
happens.
• When you turn off the Zone 2 sound by pressing
ZONE 2 ON/OFF, the selected Zone 2 source component turns
off.
– If the ZONE 1 indicator is lit on the unit’s display, nothing
happens.
Note:
If you turn off the receiver by pressing STANDBY/ON on the unit
or AUDIO POWER STANDBY on the remote control, or if you turn off
the Zone 1 sound by pressing ZONE 1 ON/OFF while recording on
the VCR 1, the VCR 1 will not turn off, but continue recording.
53-65_8040[C].p65 04.5.14, 11:30 55