JVC RX-8040B - Manuel (Page 49)

47
English
Incoming Signal Type Zone 2 Speakers Surround Back Channel EX/ES/PLIIx Available Surround Mode
Setting Setting
DTS-ES Discrete 6.1ch Activated Not effective Not effective DTS (3D-PHONIC)* 2
Deactivated 2SPK/1SPK AUTO/ON ES DSCRT
PLIIx MOVIE DTS + DD EX* 3
PLIIx MUSIC DTS + PLIIx MU
OFF DTS
NONE AUTO/ON/PLIIx MOVIE/
DTS (VIRTUAL SB)* 4
PLIIx MUSIC
OFF DTS
DTS-ES Matrix 6.1ch Activated Not effective Not effective DTS (3D-PHONIC)* 2
DTS-ES 96/24 Matrix
Deactivated 2SPK/1SPK AUTO/ON ES MATRIX* 6
PLIIx MOVIE DTS + DD EX* 3 * 6
PLIIx MUSIC DTS + PLIIx MU* 6
OFF DTS
NONE AUTO/ON/PLIIx MOVIE/
DTS (VIRTUAL SB)* 4 * 6
PLIIx MUSIC
OFF DTS
DTS, DTS 96/24 Activated Not effective Not effective DTS (3D-PHONIC)* 2
(3/2, 2/2)
Deactivated 2SPK/1SPK ON DTS + NEO:6* 6
PLIIx MOVIE DTS + DD EX* 3 * 6
PLIIx MUSIC DTS + PLIIx MU* 6
AUTO/OFF DTS
NONE ON/PLIIx MOVIE/
DTS (VIRTUAL SB)* 4 * 6
PLIIx MUSIC
AUTO/OFF DTS
DTS (3/1, 2/1, 3/0, 1/0) Activated Not effective Not effective DTS (3D-PHONIC)* 2
Deactivated Not effective Not effective DTS
DTS (Dual Mono) Not effective Not effective Not effective DUAL MONO
* 6 DTS 96/24
processing is not
applied. If you want to
apply the processing,
set the EX/ES/PLIIx
setting to “OFF.”
* 2 When the Zone 2 speakers are activated, the 3D-PHONIC processing is applied to reproduce Dolby Digital or DTS software (the
3D-PHONIC indicator also lights up).
* 3 When using PLIIx Movie to reproduce Dolby Digital or DTS software, this receiver applies Dolby Digital EX (DOLBY D EX) or DTS plus
Dolby Digital EX (DTS + DD EX) processing (6.1-channel reproduction) to the software.
* 4 Virtual 6.1-channel surround
If you have connected (and activated) the surround speakers, you can use Virtual 6.1-channel surround when playing back
Dolby Digital EX, Dolby Digital (3/2 or 2/2) or DTS-ES software without connecting the surround back speakers. This surround
reallocates the surround back channel to the surround speakers so that you can still feel the great surround effect from behind. The
VIRTUAL SB (Surround Back) indicator lights up on the display.
3D Headphone mode—3D H PHONE
If you press SURROUND when the front speakers 1 and 2 are both deactivated, 3D Headphone mode (3D H PHONE) is activated
without respect to the type of software played back.
“3D H PHONE” appears and the DSP and HEADPHONE indicators also light up on the display.
42-50_8040[C].p65 04.5.14, 11:29 47