Playing a disc, Basic playback, Auto rewind – Emerson CEDV800D Manuel d'utilisation

Page 22: Real time tape counter, General features, Pause

Advertising
background image

– 22 –

EN

1L25

BASIC PLAYBACK

Getting started

¡

Turn on the power of the TV, amplifier and any other
components which are connected to the DVD.

¡

Make sure the TV and audio receiver (commercially
available) are set to the correct channel.

¡

Select DVD mode by pressing DVD on the remote

control or output on the front panel.

1

Press POWER.

¡

“Load” will appear briefly on the display panel.

2

Press OPEN/CLOSE to open disc loading
tray.

3

Place the chosen disc in the tray, with the
label facing up.

CD

DVD-V

Notes

¡

A “prohibited icon” may appear at the top-right on
the TV screen during operation, warning that a pro-
hibited operation has been encountered by the DVD
or the disc.

¡

With DVDs that use titles for playback program sig-
nals, playback may start from the second title, or it
may skip these titles.

¡

During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.

PLAYING A DISC

AUTO REWIND

When a tape reaches the end during recording, play-
back, or fast-forward, the tape will automatically
rewind to the beginning. After rewinding finishes, the
VCR will eject the tape and switch itself off.

¡

The VCR will not rewind the tape automatically dur-
ing timer recording or One Touch Recording.

REAL TIME TAPE COUNTER

¡

This shows the elapsed recording or playback time
in hours, minutes, and seconds. (The displayed time
will not change during blank portions of the tape.)

¡

The indication will appear when the tape is rewound
further than “0:00:00” on the tape counter.

4

Press PLAY.

¡

The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, press
PLAY.

¡

When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to “TITLE MENU” on page 23.

5

Press STOP to stop playback.

GENERAL FEATURES

DVD may contain menus to navigate the disc and
access special features. Press appropriate numerical
key or use Arrow (L/K/s/B) to highlight your selec-
tion in the DVD main menu and press ENTER to con-
firm.
Note

¡

Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.

PAUSE

1

During playback, press PAUSE.

¡

Playback will pause and sound will be muted.

2

To continue playback, press PLAY.

CD

DVD-V

H9436CD(EN).qx33 03.3.11 2:57 PM Page 22

Advertising