Labconco Intelli-Sense Multi-Speed Blowers 7183413 - Manuel (Page 39)

Chapter 7: Modifying Your Blower
Product Service 1-800-522-7658 35
Original instructions
Typical Fume Removal System
This diagram details the many components that are needed to complete a typical
fume removal system. All of these components as well as others are available
from Labconco.
*Minimum of 5 to 15 feet of duct in both locations is recommended for noise reduction.
Zero Pressure
Weathercap
Thermoplastic Duct
Intelli-Sense Coated
Steel, Fiberglass or
PVC Blower
Flexible Duct Connection
Thermoplastic Duct*
Thermoplastic Duct*
90° Elbow
Manual Duct Damper
(Highly recommended)
Protector ®
Laboratory Hood
SpillStopper™ Work Surface
Protector ® Standard,
Acid or Solvent
Storage Cabinets
Speed
Control Box
Blower Transition Adapter
(for Coated Steel Blowers only)
3-5 duct diameter lengths
(approximately 3-5 feet) between
elbow and blower is required