Connecting a stereo amplifier/receiver, Record on the vcr from an amplifier/receiver, Back of vcr – RCA VR663HF Manuel d'utilisation
Page 9: Back of amplifier/receiver
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Hooking Up the VCR
Connecting a Stereo Amplifier/Receiver
Record on the VCR from an
Amplifier/Receiver
Connect your VCR to a stereo amplifier/
receiver to record stereo audio.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
3. Plug in power cords of amplifier/
receiver, VCR, and TV.
4. Turn to page 25 for "Recording Audio
Only."
You will select the line input (audio/video) on
the VCR to receive the audio signal from the
amplifier/ receiver.
Back of VCR
Back of Amplifier/Receiver
Play Back Stereo Tapes or
Receive a Stereo Broadcast
Through an Amplifier/Receiver
Connect your VCR to a stereo
amplifier/receiver to receive stereo
broadcasts or play back stereo tapes.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
3. Plug in power cords of amplifier/
receiver, VCR, and TV.
4. Turn to page 13 for "Playback
Operation."
Back of VCR
Back of Amplifier/Receiver