Broadcast stereo tv or sap (second audio program), To record stereo broadcast tv or sap, Vcr display panel – RCA VR663HF Manuel d'utilisation
Page 21: Recording a program
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Recording a Program
Broadcast Stereo TV or SAP (Second Audio Program)
Some TV programs are broadcasts with stereo audio or a second audio program (SAP).
Select STEREO to record stereo. Select SAP to record SAP. Select MONO if the stereo signal is not
strong enough and too noisy for quality reception.
To record stereo broadcast TV or SAP
VCR Display Panel
Turn on the TV and tune it to the VCR viewing channel, either 3, 4,
or TV's video input.
1. Insert a tape with safety tab in place.
The cassette-in indicator ^ lights in the VCR's display panel.
2. Press VCR1 (VCR2) to set remote to control VCR.
3. If using one of the basic hookups, make sure the VCR indicator
appears in the VCR's display panel. If not, press TVA/CR to turn
it on.
4. Select recording speed using SPEED on remote.
The tape speed indicator appears in the VCR's display panel and
on the TV screen.
5. Select the channel or line input to be recorded.
The channel number appears in the VCR's display panel and on
the TV screen.
6- To record stereo TV, the ST/MONO/SAP feature must be set to
STEREO. Press PROGAfCR+, then 5, then 6 to change.
The STEREO indicator will then light in the VCR's display panel
when the station you are tuned to is broadcasting stereo.
To record SAP, the ST/MONO/SAP feature must be set to SAP.
Press PROG/VCR+, then 5, then press 6 to change.
The ■ indicator will light in the VCR's display panel. SAP wiU
be recorded on the linear track while the normal audio is
recorded on the Hi-Fi track.
7.
8.
Press RECORD on the VCR or REC/XPR on the remote to begin
recording.
REG appears in the VCR's display panel.
Press STOP/EJECT on the VCR or STOP on the remote when
you are finished. (To playback SAP use the AUDIO PLAY
feature. See page 17.)
VCR MAIN MENU
1 VCR PLUS
Z PBOSRAB TIBER
3 REVIEW PROGRAMS
4 SET VCR CLOCK
5 SET UP VCR
1 AUTOPROGRAM CHANNELS
2 AOD/ERASE CHANNELS
3 CABLE/AHT; CABLE
4 SET UP CABLE BOX
5 SET UP VCR PLUS
6 ST/MONO/SAP: STEREO
7 AUDIO PLAT:
HlFl
8 REMOTE CONT: VCR1
PRESS NUMBER TO SELECT
PRESS PROGRAM TO END
19