RCA VR663HF - Manuel (Page 8)

Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
Option A Hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the CH4 CHS switch on the playback
VCR to either channel 3 or 4.
You will tune the recording VCR to this channel
to receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5. Turn to page 8 for "Setting Up the VCR."
□
From Antenna, Cable
or Cable Box
RF Coaxial Cable
(supplied)
Playback VCR
-- ewT
!ifo
I—VTDFn--------1
RF Coaxial |
Cable
Cables
Use the hookup to the TV
as previously selected on
pages 3,4, or 5.
Option B Hookup.
Use this hookup for slightly improved copy
quality and more convenient operation - use
of TV/VCR button not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
3. Plug in power cords of VCRs and TV.
4. Turn to page 8 for "Setting Up the VCR."
You will select the line (audio / video) input on
the recording VCR to receive the signal from
the playback VCR.
Cautiont The unauthoii2.ed re<;oTdii\g of
television programs and other materials
may infringe the rights of others.
B
Playback VCR (only)
TO
TV
CK4 CH3
cm
From Antenna, Cable
or Cable Box
RF Coaxial Cable _
(supplied)
I
Recording VCR
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.