RCA VR663HF - Manuel (Page 13)

Using the Remote Control
Buttons
VCR Function Buttons
(contlnu«d)
Number Buttons
(0 through 9 &100)
Select any channel up to 99 by
pressing two number buttons.
For a three-digit number, select a
channel over 99 by pressing the
100 button and then two number
buttons. Or, press and hold 1
until 1 — appears on the screen.
Then press the other two
numbers.
DISPLAY
Shows VCR operating displays on
the TV screen.
Displays the time counter.
Turns on memory-stop feature.
INPUT
Switches between line input and
TV channels (tuner), L appears
for line input instead of channel
in VCR's display panel.
Line input refers to the signal
coming from a component
connected to the audio/video
input jacks.
T.SEARCH (Time Search)
Displays the time search menu on
the TV screen.
SLOW a / y
Used for slow-motion playback.
TRACKING A / Y
Lets you manually reduce the
streaks that may appear on the
picture during play, slow, or
pause.
May reduce stereo playback
noise.
TV Function Buttons
Press the TV button to set remote to control a compatible TV, Some buttons rnay not work with the TV.
PROG/VCR+
Displays the VCR MAIN MENU or
VCR PLUS menu on TV screen.
CLEAR
Resets time counter to 0:00:00
when it is displayed.
Allows you to correct entries
when setting the clock or
programming VCR for a VCR
Plus+ or timer recording.
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, SLP).
EDIT
Signals two properly connected
VCRs to begin copying a tape.
See page 26.
OFF
Turns off TV when remote is set
to control TV.
Used tilong with the TV button to
turn a compatible TV on or off
when the remote is programmed
to control that TV. See page 12.
VOLUME A / Y
Raises and lowers sound.
PREV. CH. (Previous Chaimei)
Switches between two channels.
Select one channel and then select
another. Press PREV CH to
switch between the two channels.
CHANNEL A / Y
Selects next higher or lower
channel in the TV's channel
memory.
MUTE
Turns the TV sound on or off.
Number Buttons
(0 through 9 and 100)
Select any channel up to 99 by
pressing two number buttons.
Select a channel over 99 by
pressing the 100 button and then
two number buttons for
compatible TVs.
DISPLAY
Shows the status displays on the
screen.
Removes menus or displays from
the screen.
CLEAR
A
Removes menus or status
displays from the screen.
11