Pause for stop-action, Slow motion, Picture search – RCA VR663HF Manuel d'utilisation
Page 16: Fast forward search, Rewind search, Frame advance (f.adv/cs button), Commercial scan (f.adv/cs button), Using the playback features, Playing a tape
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Playing a Tape
Using the Playback Features
Pause for Stop-Action
This feature stops the tape in action and allows you to examine
the details of the scene. Stop-action works best for tapes
recorded in the SP and SLP speeds.
1. During playback, press PLAY/PAUSE on the VCR or
PAUSE on the remote to stop the action,
STILL appears in the VCR's display panel.
2. Press TRACKING A or ▼ to reduce any jittering of
the picture. If streaks or bars appear, press SLOW
Aor ▼ and then TRACKING
a
or ▼.
3. Press PLAY/PAUSE on the VCR or PAUSE (or PLAY)
on the remote to return to playback.
The VCR will automatically switch from pause to
stop after a few minutes.
Slow Motion
You can view the picture in slow motion during play or play
pause. SLOW
A
and
T
allow you to change the speed. Sound is
turned off during slow-mohon playback. Slow motion works
best in the SP and SLP speeds.
to increase the speed or ▼ to decrease
to remove any streaks from
1. Press SLOW
the speed.
2. Use TRACKING
a
or
the picture.
3. Press PLAY/PAUSE on the VCR or PLAY on the
remote to return to playback.
The VCR will automatically switch from slow-motion
playback to stop after a few minutes.
Picture Search
You can search a picture during playback by fast forwarding or
rewinding the tape. Sound is turned off during picture search.
The picture is best for tapes recorded in the SP or SLP speed.
Fast Forward Search
1. Press F.FWD to search forward at a faster-than-
normal speed.
2. Press F.FWD again, PLAY/PAUSE on the VCR, or
PLAY on the remote to return to playback.
Rewind Search
Use REW instead of F.FWD for the same steps in "Fast
Forward Search."
Frame Advance (F.ADV/CS Button)
Frame Advance lets you view one stop-action frame after
another. Frame advance works best for tapes recorded in the SP
or SLP speed.
1. Press PLAY/PAUSE on the VCR twice or PAUSE on
the remote to stop the action.
2. Press F.ADV/CS each time you want to view a frame
of the scene.
Press and hold F.ADV/CS to continuously move the
tape.
-
3. Press PLAY/PAUSE on the VCR or PAUSE {or PLAY)
on the remote to resume playback.
Commercial Scan (F.ADV/CS Button)
This is useful for skipping commercials or short program
segments.
1. Press F.ADV/CS once during playback to advance the
tape approximately 60 seconds.
2. Press F.ADV/CS twice during playback to advance
the tape approximately 120 seconds.
14