RCA VR663HF - Manuel (Page 25)

Recording n Program
The VCR Pluse and timer program features let you program the VCR to record up to eight
different programs within a one year period. Before setting the timer, make sure that:
• Cable box set up has been completed if you use a cable box.
• The clock is set correctly.
• A tape with safety tab has been inserted with enough tape to record the programs.
• The remote is set to control the VCR - using VCR1 (VCR2).
Setting a Timer Recording
Recording While You’re Away (Timer Recording)
1. Press PROG/VCR+ on the remote to display the menu.
If VCR PLUS menu appears, press PROGA/CR+ again.
2. Press 2 to display the PROGRAM TIMER menu,
3. Press 1, 2, or 3 to select type of program.
1 ONE'TIME PROGRAM - single program.
2 DAILY PROGRAM - Monday through Friday.
3 WEEKLY PROGFtAM - same program once a week.
4. Press numbers on the remote to enter the channel number
(or INPUT to select line input), bme to begin, time to turn off,
and date of the recording. Just foUow the on-screen prompts.
5. Select recording speed using SPEED on the remote.
6. Press PROGA/CR+ to enter your program. A reminder
appears which will time out or you can press PROGA/CR-i- to
return to the VCR MAIN MENU.
PROGRAMS OVERLAP may appear on the screen if you have
entered two programs where the times overlap.
7. Repeat steps 1-6 for additional programs.
8. Turn off the VCR before recording begins.
TIMER should appear in the VCR's display panel.
9. If using a cable box, turn on the cable box and tune it to the
channel you want to record before the time the recording is to
begin.
VCR MAIN MENU
1 VCR PLUS
2 PROGRAM TIMER
PROGRAM TIMER
1 ONE-TIME program
2 OAILY PROGRAM CH-F)
3 WEEKLY PROGRAM
ONE-TIME PROGRAM 1
CHANNEL
ONE-TIME PROGRAM 1
CHANNEL 08
TINE ON LU;--.
ONE-TIME PROGRAM 1
CHANNEL 08
TIME ON 09:30 PM
TIME OFF '~4- —
ONE-TIME PROGRAM 1
CHANNEL 08
TIME ON 09:30 PM
TIME OFF 10:00 PM
START DATE 11/11/93 THU
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS PROGRAM TO SET
Checking or Clearing VCR Plus-t- and Tinier Recordings
1. Press PROGA/CR-t- on remote to display VCR MAIN MENU on
TV screen.
If VCR PLUS menu appears, press PROG/VCR+ again.
2. Press 3 for REVIEW PROGRAMS.
Each entered program is displayed for a few seconds in
sequence,
3. Press DISPLAY or 3 to display information at a faster pace.
4. Press CLEAR when the program you want to erase appears on
the screen,
5. Press PROGA/CR- f on remote to remove display from the TV
screen.
VCR MAIN MENU
1 VCR PLUS
2 PROGRAM TIMER
3 REVIEW PROGRAMS
ONE-TIME PROGRAM 1
channel
TIME ON
TIME OFF
START DATE
TAPE SPEED
08
09:30 PM
10:00 PM
11/11/93 THU
SLP
PRESS DISPLAY FOR NEXT
PRESS CLEAR TO ERASE
PRESS program to end
23