Breville BDF600XL - Manuel (Page 19)

19
7. The stainless steel housing is
submersible and should be washed by
hand in warm soapy water with a soft
sponge, rinse and dry thoroughly.
8. After cleaning, reassemble the deep fryer
for storage. Do not place anything on top
of the deep fryer during storage.
NOTE:
Do not use any abrasive cleaners,
such as steel wool to clean the
surface of your deep fryer as this
will scratch the coating.
NOTE:
Oil vessel may be washed in a
dishwasher.
CARE & CLEANING YOUR BREVILLE DEEp FRYER
1. Before cleaning, always ensure the
deep fryer power switch is turned to the
'O' (Off) position and is disconnected
from the power outlet.
2. Ensure the deep fryer and oil are
completely cool. Oil will retain its
temperature for a long time after use.
Do not attempt to move or carry any
part of the deep fryer while hot.
3. Remove lid and lift out frying basket.
4. Remove the Control Panel/Cool Plate™
Element by lifting upwards. Place the
element onto paper towels to absorb
excess oil. The Control Panel should
never be immersed in water or other
liquids when cleaning. Clean the outer
surface of the heating element with a
damp cloth and mild soap solution or
plain water.
5. Once the oil has cooled, grasp each
side of the removable oil vessel and lift
upwards. Using the spout on the end of
the oil vessel, pour the oil into a suitable
container. Strain the oil if it is to be
re-used.
NOTE:
Oil should be filtered after each
use and stored in a clean, air-tight
container in a cool area. Good
quality oil can be used several
times. Do not store the oil in the
deep fryer. Discard used oil in a
sealed container with household
waste. Do not pour down a sink
or drain.
6. The frying basket, lid and oil vessel
should be washed in warm soapy
water with a soft sponge, rinse and
dry thoroughly.
BDF600XL_IB_H10.indd 19 6/05/10 11:20 AM