Pioneer DV-636D - Manuel (Page 30)

30
En
Changing to the Setup Screen
“Expert” Menu Mode
The Setup screen menus are divided into two levels,
[Basic] and [Expert], to make this unit more convenient
to operate for different levels of users. The [Basic]
menu mode contains functions that may be considered
necessary for the basic operations of this player and
helpful on-screen information identified by the
i mark.
The [Expert] menu mode adds to the [Basic] menu
mode additional functions of the player that can be
adjusted to further personalize performance of the
player.
In this manual, functions that are contained in the
[Expert] menu mode are identified by the Expert icon.
Make changes to the [Setup Menu Mode] setting in the
Setup screen General menu.
7
Use the cursor buttons (
5/∞) to select a
new setting and press ENTER to set the
new setting in memory. Press RETURN or
the cursor button (
2) to exit the options
without making any changes.
8
Press RETURN or the cursor button ( 2) to
go back to the main menu bar to select
another menu.
9
Press SETUP to close the Setup screen.
The Setup screen closes.
How to interpret the setting indicator colors in
the Setup screen menus
When setting up the system, or when making
adjustments, it is convenient to know what settings are
applicable to the different disc formats. When the
settings appear for each menu option, the currently
selected setting appears with the setting indicator
highlighted in one of three colors: blue, green or yellow.
These colors correspond to what formats the menu
option effects as shown in the table below.
Note
If a setting applicable only to DVDs is changed while a Video
CD or CD is loaded, a blue DVD icon appears in the upper
right hand corner of the screen to indicate that the setting is
not applicable to the currently loaded disc. The setting will be
effective the next time a DVD is loaded.
Color of indicator Disc format(s)
Blue DVD only
All compatible formats
DVD / Video CD
Green
Yellow
7
8
RANDOM PROGRAM SEARCH MODE
0 9 8 7
+10 6 5 4
CLEAR 3 2 1
1 REV FWD ¡
PLAY 3 PAUSE 8 STOP 7
e STEP/SLOW E
NEXT ¢ PREV 4
RETURN
REPEAT
CONDITION
MEMORY
LAST
MEMORY
ANGLE SUB TITLE AUDIO
SETUP MENU TOP MENU
DISPLAY
¶
5
∞
3 2
Î
¶
OPEN/
CLOSE
REPEAT
A-B
¶
¶ 5
5
5 5
EN TER
¶
¶
7, 8
9
Note
The next time you press SETUP, you’ll see the menu screen
that you exited from last time.
Setting the Video Output Format
for the AV1 (RGB)-TV Connector
When connections are made to the AV1 (RGB)-TV jack
on the player via a SCART cable, it is possible to select
the video format that is compatible with your TV or
monitor. Select [Video] to have a composite video signal
output, [S-Video] to have an S-video signal output, and
[RGB] to have an RGB signal output. For more
information on which format is most appropriate, refer to
the instructions supplied with your TV or monitor.
Make changes to the [Video Out] setting in the Setup
screen Video menu.
Audio1 Audio2 Language
TV Screen – 16:9(Wide)
Video Out
Move Exit
RGB
S-Video
Video
SETUP
Set AV CONNECTOR video format
General Video
Settings: Video*
S-Video
RGB
* Factory setting
IMPORTANT
Audio1 Audio2 General Language Video
Parental Lock – Level 8
Setup Navigator
Setup Menu Mode
Move Exit
Expert
Basic
SETUP
Change menu mode
Settings: Expert
Basic*
* Factory setting
Note
On-screen information only appears in the [Basic] menu
mode.