Pioneer DV-636D - Manuel (Page 19)

English
19
En
MAKING CONNECTIONS
Video Connections
This player features S-video and composite video output
possibilities.
Check the manual supplied with your TV or monitor to
determine the best possible connection for your system.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General to set whether you are using a wide screen or
standard size TV or monitor (page 22). Additionally, you
can use the [TV Screen] setting in the Setup screen
Video menu (page 34).
S-VIDEO OUT
• Make S-video connections to a TV or monitor with S-
video input to produce a high quality video image.
• Use an S-video cable (not supplied) to connect one of
the S-VIDEO OUT jacks on the player to an
S-video input on the TV or monitor.
VIDEO OUT
• Make composite video connections to a standard TV
or monitor with a video input jack.
• Use the supplied video cord to connect one of the
VIDEO OUT jacks on the player to the video input on
the TV or monitor.
• Be sure to match the color of the plug with the color
of the jack (yellow).
TV SYSTEM switch
Video output changes as follows according to the
playback disc‘s recorded format.
NTSC
= PAL, PAL = NTSC conversion is possible on
Video CDs. PAL = NTSC conversion is not possible on
DVDs. When the TV SYSTEM switch is set to the
AUTO position, the disc’s format will be output as is.
When a CD or disc is not loaded, the previous video
output format will be selected.
About MOD. (Modulation) PAL
• SHRINK
Most models of the newly developed countdown PAL
TV system detect 50 Hz (PAL)/60 Hz (NTSC) and
automatically switch vertical amplitude, resulting in a
display without vertical shrinkage.
• If your PAL TV does not have a V-Hold control, you
may not be able to view NTSC disc because the
picture may roll. If the TV has a V-Hold control, adjust
it until the picture stops rolling. On some TVs, the
picture may shrink vertically, leaving black bands at
the top and bottom of the screen. This is not a
malfunction; it is caused by the NTSC
= PAL
conversion.
Type
DVD
Video CD
CD, No disc
Format
NTSC
PAL
NTSC
PAL
Disc Output format
Position of TV SYSTEM switch
NTSC PAL AUTO
NTSC MOD. PAL NTSC
PAL PAL
NTSC MOD. PAL NTSC
NTSC PAL PAL
NTSC PAL NTSC or PAL
NTSC
PAL AUTO
TV SYSTEM
TV or monitor
CONTROL OPT.
AUDIO OUT (2CH) AUDIO OUT (5.1CH)
AC IN
VIDEO OUT
NTSC PAL AUTO OUT IN
R
2 1
R
L L 1
2
1
2
FRONT SUB WOOFER
CENTER
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
SURROUND
S-VIDEO OUT
AV2 AV1 (RGB) -TV
S-VIDEO IN
1
2
S-VIDEO
OUT
TV or monitor
CONTROL OPT.
AUDIO OUT (2CH) AUDIO OUT (5.1CH)
AC IN VIDEO OUT
NTSC PAL AUTO OUT IN
R
2 1
R
L L 1
2
1
2
FRONT SUB WOOFER
CENTER
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
SURROUND
S-VIDEO OUT
AV2 AV1 (RGB) -TV
VIDEO IN
VIDEO OUT
1
2