Sylvania DVL100CB - Manuel (Page 17)

– 17 – EN
1A29
A-B REPEAT
You can define a section to be played back repeatedly.
1 Press the A-B REPEAT button during playback.
¡ The starting point (A) will then be
selected.
2 Press the A-B REPEAT button again at the
end point (B) of the desired section.
¡ The selected section will be
played back repeatedly.
3 To exit A-B repeat playback, press the A-B
REPEAT button and set it to OFF.
Notes
¡ With DVDs, the A-B repeat section can be set only
within the current title.
¡ With audio CDs, the A-B repeat section can be set
within the current track.
¡ A-B repeat is not available with some scenes in
DVD.
¡ To cancel the A point which was set, press RETURN
button.
CD DVD
Repeat
[ A - ]
PROGRAM (Audio CD)
1 Press the MODE button in stop mode.
¡ The program screen will appear.
CD
Audio CD
Program
Total
[Track]
– –
[Time]
0:00:00
Random : MODE
Track 00 / 15
Exit : RETURN
Start : PLAY Delete : CLEAR
Repeat
[ A - B ]
Repeat
[ off ]
2 Press the numeric buttons to enter the
desired track numbers.
¡ The total playback time for the
selected tracks will appear on the
TOTAL line.
3 Press the PLAY button.
¡ Playback will start in the programmed order.
¡ While the program is being played back, the STOP
button works as follows.
¡ Press the STOP button once and then the PLAY
button again, playback will restart from the point
where the STOP button was pressed. (Program
continued)
¡ Press the STOP button twice and then the PLAY
button again, playback will restart from the first tune
in the program in the usual way. (Program
continued)
¡ Press the STOP button three times and then the
PLAY button again, playback will restart from the
track in the usual way. (Program cleared)
Notes
¡ Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡ Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡ Numbers which exceed the number of tracks on the
disc in the tray are not accepted.
¡ Playback from a desired track and random playback
are not available during program playback.
¡ Program settings are cleared when the power is
turned off or the disc loading tray is opened.
¡ If the track no. is once set in the program, the setting
cannot be changed.
02 05 07 14 01 09 13 10 03 11
08 04
Audio CD
Program
Total
[Track]
12
[Time]
0:47:29
Random : MODE
Track 04 / 15
Exit : RETURN
Start : PLAY Delete : CLEAR
E5502CD 01.3.30 1:11 PM Page 17