Pioneer MODE D'EMPLOI DEH-P780MP - Manuel (Page 56)

Fader (balance adjustment)
—Position (posi-
tion selector)
—TA Mode (time alignment set-
ting)
—Time Alignment (time alignment
adjusting)
—Loudness (loudness)—Powerful
(graphic equalizer adjustment)
—FREQ. (16-
band graphic equalizer adjustment)
—
Subwoofer1 (subwoofer on/off)
—
Subwoofer2 (subwoofer cut-off frequency)
—
Subwoofer3 (subwoofer slope)
—Front HPF
(front high pass filter slope)
—
Front HPF FREQ. (front high pass filter cut-off
frequency)
—Rear HPF (rear high pass filter
slope)
—Rear HPF FREQ. (rear high pass filter
cut-off frequency)
—BBE (BBE)—COMP/BMX
(Compression and BMX)
—SLA (source level
adjustment)
—AUI sound level (auditory user
interface)
# When selecting OFF in TA Mode, you cannot
switch to
Time Alignment.
# You can select Subwoofer2 and
Subwoofer3 only when subwoofer output is
turned on in
Subwoofer1.
# When tuner, television or AUX is selected as a
source, you cannot select
COMP/BMX.
# When selecting the FM tuner as the source,
you cannot switch to
SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using the position selector
One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center of the sound field. The posi-
tion selector function lets you automatically
adjust the speakers
’ output levels and inserts
a delay time to match the number and posi-
tion of occupied seats.
1 Use MULTI-CONTROL to select Position.
Position appears in the display.
2 Push MULTI-CONTROL left, right, up or
down to select a listening position.
Direction Display Position
Left Front Left Front seat left
Right Front Right Front seat right
Up Front Front seats
Down All All seats
# To cancel the selected listening position, push
MULTI-CONTROL in the same direction again.
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1 Use MULTI-CONTROL to select Fader.
Fader appears in the display.
# If the balance setting has been previously ad-
justed,
Balance will be displayed.
2 Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time
MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
Front 25 to Rear 25 is displayed as the front/
rear speaker balance moves from front to rear.
# Front/Rear 0 is the proper setting when only
two speakers are used.
3 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time
MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
Left 25 to Right 25 is displayed as the left/
right speaker balance moves from left to
right.
Audio Adjustments
En
56
Section
13