Pioneer MODE D'EMPLOI DEH-P780MP - Manuel (Page 48)

Watching the television
2 2 2 2 1 1 1 1 3 3 3 3
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner
’s operation manual. This section pro-
vides information on TV operations with this
unit which differs from that described in the
TV tuner
’s operation manual.
1 Band indicator
Shows which band the TV tuner is tuned to.
2 Preset number indicator
Shows which preset has been selected.
3 Channel indicator
Shows which channel the TV tuner is tuned.
1 Press SOURCE to select the TV.
Press SOURCE until you see Television dis-
played.
2 Press BAND to select a band.
Press BAND until the desired band is dis-
played, TV-1 or TV-2.
3 To perform manual tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step.
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can skip broadcasting channels. Seek
tuning starts as soon as you release
MULTI-CONTROL.
TV tuner
En
48
Section
11