Sony STR-DA1800ES - Manuel (Page 92)

92 US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm masterpage: Left
STR-DA1800ES
4-428-194-12(2)
• ANALOG: Specifies the analog audio
signals input to the AUDIO IN (L/R)
jacks.
Notes
• Based on the input, “------” appears on the display
panel, and other modes cannot be selected.
• When “A. DIRECT” is being used, audio input is
set to “ANALOG”. You cannot select other modes.
Using other video/audio
input jacks
(Input Assign)
You can reassign video and/or audio signals to
another input jacks.
After you have reassigned the input jacks, you
can use the input button (or INPUT
SELECTOR on the receiver) to select the
equipment you connected.
You can reassign the COMPONENT VIDEO
and DIGITAL input jacks to other input if the
default settings of the jacks do not correspond
to your connected equipment.
Example:
When you connect the DVD player to the
OPTICAL IN 1 (SAT/CATV) and
COMPONENT VIDEO IN 2 (SAT/CATV)
jacks.
– Assign the OPTICAL SAT/CATV IN jack to
“DVD”.
– Assign the COMPONENT VIDEO SAT/
CATV (IN 2) jacks to “DVD”.
1
Press MENU.
The menu is displayed on the TV screen.
2
Select “ Input”, then press
or b.
3
Select the input name you want
to assign.
4
Press TOOLS/OPTIONS.
The option menu appears.
5
Select “Input Assign”, then
press
or b.
The “Input Assign” screen appears.
6
Select the video and/or audio
signals you want to assign to
the input which you selected in
step 3 using
V/v/B/b.
7
Press .
Component video and digital
audio input assign