Sony STR-DA1800ES - Manuel (Page 25)

25 US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US04GET_STR-DA1800ES-CEL.fm masterpage: Right
STR-DA1800ES
4-428-194-12(2)
Co
nn
ecti
on
s
* When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to the
subwoofer, and the sound may not be output.
You can connect two subwoofers to the receiver.
The same signals are output from each of the
SUBWOOFER jacks.
**Notes on the SPEAKERS SURROUND BACK/
FRONT HIGH/BI-AMP/FRONT B terminals
connection.
– If you connect only one surround back speaker,
connect it to L of this terminals.
– If you have an additional front speaker system,
connect them to this terminals.
Set the “SB Assign” to “Speaker B” in the
Speaker Settings menu (page 43).
You can select the front speaker system you
want by using the SPEAKERS button on the
receiver (page 43).
– You can connect the front speakers to this
terminals using bi-amplifier connection
(page 94).
Set the “SB Assign” to “BI-AMP” in the
Speaker Settings menu (page 94).
Note
After you have installed and connected your
speaker, be sure to select the speaker pattern from
the Speaker Settings menu (page 42).