Sony STR-DA1800ES - Manuel (Page 91)

91 US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm masterpage: Right
STR-DA1800ES
4-428-194-12(2)
Other Oper
ations
Switching the monitors
that output the HDMI
video signals
When you have two monitors connected to the
HDMI OUT A and HDMI OUT B jacks, you
can switch the output for these two monitors
using the HDMI OUT button on the remote
control.
1
Turn on the receiver and the
two monitors.
2
Press HDMI OUT.
Each time you press the button, the output
will be switched as follows:
HDMI A
t HDMI B t HDMI A + B
t OFF t HDMI A…
Notes
• If the compatible video format differs between the
monitors connected to the HDMI OUT A jack and
the HDMI OUT B jack of the receiver, “HDMI
A + B” may not work.
• Depending on the playback equipment you
connect, “HDMI A + B” may not work.
• If “Zone2 / OutB” setting is “Zone2”, the output
will be switched as follows:
HDMI A t OFF t HDMI A.
• “Zone2 / OutB” should be set to “OutB” when you
use HDMI OUT B (ZONE2) jack as OUT B.
Switching between
digital and analog audio
(INPUT MODE)
When you connect equipment to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote control.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display panel.
• AUTO: Gives priority to digital audio
signals. If there are more than one
digital connection, HDMI audio signals
have priority.
If there are no digital audio signals,
analog audio signals are selected. When
TV input is selected, priority is given to
the Audio Return Channel (ARC)
signals. If your TV is not compatible
with the ARC function, the digital
optical audio signals are selected.
If the Control for HDMI functions of
both the receiver and the TV are not
activated, the ARC does not work.
• COAX: Specifies the digital audio
signals input to the DIGITAL
COAXIAL jack.
• OPT: Specifies the digital audio signals
input to the DIGITAL OPTICAL jack.
HDMI OUT
Other Operations
continued