Sony STR-DA1800ES - Manuel (Page 129)

129 US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US07ADD_STR-DA1800ES-CEL.fm masterpage: Right
STR-DA1800ES
4-428-194-12(2)
Ad
ditional Inf
o
rmation
• You cannot play the following tracks:
– A track that violates playback
restrictions.
– A track with irregular copyright
information.
– A track that you purchased at an online
music store that does not allow home
network streaming.
– A track in a format unsupported by the
receiver (page 74).
• Confirm that the selected track has not
been erased from the server. If the track
has been erased, select another track.
• Make sure that the wireless LAN router/
access point is turned on.
• Make sure that the server is turned on.
• The server may be unstable. Restart it.
• Confirm that the receiver and the server
are connected to the wireless LAN router/
access point correctly.
“No Track” appears.
• If there are no tracks or folders in the
selected folder, you cannot extend the
folder to display its contents.
You cannot play a copyrighted WMA
format track.
• For how to check the copyright protection
of a WMA file, see page 75.
You cannot select a previously
selected track.
• The track information may have been
changed on the server. Reselect the server
in the server list (page 73).
Devices on the home network cannot
connect to the receiver.
• “Network Standby” may be set to “Off”.
Turn on the receiver or set “Network
Standby” to “On” (page 106).
• Confirm that the network is correctly set
up. If it is not, the connection cannot be
made (page 104).
• The device on the device list is set to “Not
Allow” (page 105), or the device is not
added to the device list (page 105).
• A maximum of 20 connectable devices has
been set. Delete unnecessary devices on
the device list, and then set “Auto Access”
to “Allow” (page 105).
• Server operation of the receiver is
suspended if the receiver is conducting
one of the following operations.
– Playing a track stored on the server (the
receiver is operating as a player)
– Updating the software
– Formatting the system
The receiver cannot be turned on
automatically when accessed by
devices on the network.
• The receiver itself does not support the
Wake-on-LAN standard. Therefore the
receiver cannot be turned on by Wake-on-
LAN when “Network Standby” is set to
“Off”. Set “Network Standby” to “On” so
that the receiver can respond to operations
by other devices via a network (page 106).
Devices on the network cannot turn on
the receiver.
• The receiver cannot be turned on with a
Wake-on-LAN start up operated by other
devices on a network.
The receiver cannot play the track that
is currently being played by the PARTY
host.
• The PARTY host is playing a track of an
audio format that cannot be played on the
receiver.
• It may take a while before the playback
sound is output.
The receiver joins an unintended
PARTY.
• If more than one PARTY has been started
when the receiver joins, the receiver may
not be able to join the PARTY you want.
Close the other PARTY, and then join the
PARTY you want.