Listening to music of a bluetooth device – Sony STR-DA1800ES Manuel d'utilisation
Page 85
85
US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm
masterpage: Right
STR-DA1800ES
4-428-194-12(2)
Using
Bl
ueto
oth
Fe
atur
es
Notes
• To be able to use the Bluetooth function, the
Bluetooth device to be connected requires the same
profile as the receiver’s.
Note also that even if the same profile exists,
devices may vary in function depending on their
specifications.
• Due to the characteristic of Bluetooth wireless
technology, the sound played on this receiver is
slightly delayed from the sound played on the
Bluetooth device during listening to the music.
Listening to music of a
Bluetooth device
You can play music of a Bluetooth device via
this receiver after pair and connect the
Bluetooth device with the receiver.
Check the websites for the latest information
about compatible Bluetooth devices with
URLs listed under “About support
information” (page 132).
Pairing is an operation where Bluetooth
devices register with each other beforehand.
Use the procedure below to pair the receiver
with your Bluetooth device. Once a pairing
operation is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of a
Bluetooth device” (page 86).
1
Place the Bluetooth device
within 1 meter (3.3 feet) from
this receiver.
2
Press BLUETOOTH to select
Bluetooth function.
3
Hold down BLUETOOTH for 2
seconds to activate the pairing
mode of the receiver.
“Pairing ready” appears on the TV screen
and “BLUETOOTH” flashes quickly on
the display panel. Perform step 4 within 5
minutes, otherwise pairing will be
canceled. In this case, repeat this step.
4
Perform pairing on the
Bluetooth device to detect this
receiver.
For details, refer to the operating
instructions of your Bluetooth device.
A list of detected devices may appears on
the Bluetooth device display depending
on the type of Bluetooth device. This
receiver is displayed as
“STR-DA1800ES”.
Pairing the receiver with a
Bluetooth device
BLUETOOTH
continued