Harman Stove Company PC 45 - Manuel (Page 4)

4 PC 45 Corn/Pellet Stove
Assembly and Installation
Unpacking
The PC 45 is bolted to the skid to prevent move-
ment during shipping.
To free the stove from the skid you must re-
move the hold-down bolts in the rear of the pedestal
base.
Installing rear cover panels
The rear cover panels are removed from the
stove to make it easier to get at the hold-down bolts.
The rear cover panels are packed inside the
hopper and should be installed on the stove as
shown. It is recommended that the rear covers are
installed after the unit is in place and the vent pipe is
installed.
Firebrick
Install the firebrick vertically on the angle above
the burnpot.
Rear
Cover Panels
Fig. 1
Fig. 2
Shipping Bolts: These holes are
also used for Mobile Home
Installation