Cooktop safety installation requirements, Danger warning, Tools and parts – JennAir Euro-Style Series 30 Inch Electric Cooktop Installation Instructions Manuel d'utilisation

Page 2

Advertising
background image

2

COOKTOP SAFETY

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools

listed here.

Tools needed

Tape measure

Flat-blade screwdriver

Phillips head screwdriver

Drill

Level

6" socket extension

Marker or pencil

Pliers

1

/

4

" drill bit

Jigsaw

Ratchet with

3

/

8

" socket

1

/

4

" nut driver

Parts supplied

Vent grille

Pre-filter

Plenum

Plenum screw pack

Downdraft motor

assembly

Parts needed

A UL Listed or CSA Approved strain relief for

7

/

8

" (2.2 cm)

knockout.

A UL Listed or CSA Approved conduit connector for

1

/

2

"

(1.3 cm) trade-size metal-clad conduit

UL Listed wire connectors

Metal ducting

Wall cap
6" (15.2 cm) Round Surface Wall Cap Damper Order Part

Number A406
3

1

/

4

" x 10" (8.3 cm x 25.4 cm) Surface Wall Cap Damper

Order Part Number A403
To order, see the “Assistance or Service” section of the Use

and Care Guide.

Vent clamps

Check local codes. Check existing electrical supply.

See the “Electrical Requirements” section.
It is recommended that all electrical connections be made

by a licensed, qualified electrical installer.

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

Advertising