Motorola MOTOTRBO SL300 Portable 2-Channel Analog/Digital 2-Way Radio (UHF Band, No Display) - Manuel (Page 34)

Main Channel Scan (Manual)
Your radio scans all the channels or groups in your
scan list. On entering scan, your radio may, depending
on the settings, automatically start on the last scanned
active channel or group, or on the channel where scan
was initiated.
Auto Scan (Automatic)
Your radio automatically starts scanning when you
select a channel or group that has Auto Scan enabled.
Turning Scan On or Off
Follow the procedure to turn scan on or off on your radio.
Do one of the following:
• Press the programmed Scan button to start or
stop Scan.
• Turn the Channel Rocker to select a channel
programmed with Auto Scan enabled.
If scan is enabled:
• The yellow LED blinks.
• A positive indicator tone sounds.
If scan is disabled:
• The LED turns off.
• A negative indicator tone sounds.
Responding to Transmissions During
Scanning
During scanning, your radio stops on a channel or group
where activity is detected. The radio stays on that channel
for a programmed duration known as hang time. Follow the
procedure to respond to transmissions during scanning.
1 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the
PTT button, indicating
the channel is free for you to respond. Press the PTT
button during hang time.
The green LED lights up.
2 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
English
34